Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Metric

Irwin Marples Bevel Edge Wood Chisel Sets

Hardened and tempered one piece steel blades, used for chamfering, dovetailing and making clean cuts in tight corners. With 'splitproof' handles which are designed to absorb hammer blows and hard demanding woodwork. Available in a set of 4 or 6 chisels.

M373 Set of 6 Chisels

Contents: 6, 10, 13, 19, 25 and 32mm.

Kennedy Tin Snips

Kennedy straight blade tin snips are a traditional design, suitable for the general purpose cutting of sheet metal in a wide range of materials such as copper, aluminium and mild steel.

Manufactured from drop forged carbon steel with hardened and precision ground blades which can be re-sharpened.

Available in a range of sizes:

Straight Tin Snips

Sykes-Pickavant Hydraulic Ball Joint Separator

Manufactured from hardened steel with tough epoxy coating. Tapered fork for easy access. Hydraulic ram allows up to 8 tonnes of force to be applied. Jaw opening: 70mm. Throat width: 36mm. Throat depth: 50mm.

1/4" AF Hexagon Drive Screwdriver Bits

High alloy chrome Molybdenum steel for use on hand and power tools.

Tamper Resistant Hexagon

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Flat

Neo-Hold Gripping Magnet

A high power gripping magnet achieved by two poles close together on one face. Thus a greater holding power is created, more than a pot or button magnets of a similar size. Ideal for confined work areas where more holding power is required. Can be used in temperatures up to 100°C.

Rutland™ Bow Saws

All models feature lever tension handles for rapid blade change & rigid oval section frames. Supplied with clip-on plastic blade protectors to prevent injuries during transportation and storage. Suitable for cutting dry and green wood. Suitable for gardeners, landscapers, builders, farmers etc. Standard duty suitable for occasional use e.g. DIY, gardener etc. Heavy duty suitable for regular use e.g. professional landscapers etc.

Loggers Pattern

Full frame suitable for heavier sawing of logs, tree trunks etc.

Mechanical Pullers - 2 Jaws - Industrial Reversible/Double Ended

The double ended reversible/double ended drop forged steel jaws, are heat treated for strength and durability. They can be used internally or externally.
083100:
Spread: 200mm.
Reach: 140mm.

Industrial Reversible/Double Ended

Kennedy 7 Drawer Stainless Steel Roller Cabinet

Manufactured from heavy gauge stainless steel with double wall construction side panels and welded joints for added rigidity. Quick release smooth running ball bearing drawer slides. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent re-location when loaded and should only ever be pushed. Suitable for use in health and catering environments.
7 Drawer
Drawer sizes (W x H x H):
5, 597 x 428 x 90mm.
1, 597 x 428 x 135mm.
1, 597 x 428 x 180mm.