1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

AF Deep

1? Drive Inch Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Monument Tools Pipe Cutters

Using a pipe cutter rather than a hacksaw while installing new pipe work avoids swarf entering the system, which may cause problems or damage when system is used.

Copper Pipe Cutters
Rigid construction suitable for use in confined spaces. Large feed screw with fluted handle for accurate adjustment of cutter depth. The cutter is manufactured from hardened and tempered steel. Three different capacity cutters are available.

266E

Capacity: 12.7 - 44mm. Weight: 458g. Supplied with spare cutter in the fluted handle.

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

Nut Spinners

Manufactured from hardened and tempered chrome vanadium steel, with satin chrome finish. Oil and acid resistant high impact plastic handles 6?? (150mm), combined socket and blade length. Overall length: 230mm.

Inch (BA)

3 Piece Oxygen/Lamda Sensor Socket Set

3 piece universal set. Essential for servicing today's computer-controlled vehicle systems. Easily removes exhaust gas oxygen sensors (known as "EGO", "O2" or "Lambda" sensors), vacuum switches and pressure switches. Also suitable for diesel injectors found on Mitsubishi, Nissan, Opel, Vauxhall and VW vehicles. Made from heat treated cast steel.

Set contains:
22mm (7/8") hex, 1/2" square drive socket with 7.5mm side slot for sensor wire clearance. Socket has 22mm hex for use with a spanner. Overall length 80mm.

22mm (7/8") hex, crow's foot style wrench, 1/2" square drive (double square for easy access). With full length 11mm slot for total clearance of switch/sensor wire

22mm (7/8") hex, crow's foot style wrench, 3/8" square drive. With full length 8.6mm slot for total clearance of switch/sensor wire.

Kennedy Professional 1/4 '' Square Drive Socket Sets

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. Sockets have a knurl feature to give a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. Chamfered leading edge ensures easy fastener location. Sockets manufactured to: ANSI B107.5M : 1987, ANSI B107.1 : 1978 & BS 4006 : 1992. Accessories manufactured toa: ANSI B107.10M : 1982 & BS 4006 : 1992.

TS46MA 46 Piece Metric/AF Standard Sockets with Screwdriver Bits

Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm. AF Sockets: 3/16", 7/32", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2". Screwdriver Bits: Slotted 4, 5.5mm. Crosspoint No.2, No.3. Hex Socket: 3, 4, 5, 6, 8mm. Hex A/F Sockets: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16". Accessories: Sliding T-handle, ratchet handle, wobble extension 50 & 150mm, extension bars 100 & 250mm, universal joint, jointed swivel handle 150mm, flexible extension 150mm, spinner handle.

Kennedy Carpenters Claw Hammers

Manufactured from high-grade drop forged steel, fully heat-treated, with the claw being shaped in a continuous curve and tapered to grip the nail firmly.

Solid Steel Shaft

High strength all steel construction with slip resistant and shock absorbing textured rubber grip for improved user comfort and control.

Stanley FAT MAX Screwdrivers

Stanley Fat Max screwdrivers with soft grip handles and smooth domed ends to allow added comfort and a fast spinning action. Handles are moulded directly to the chrome vanadium shaft by a virtually unbreakable bond making them highly reliable and providing extra long life. colour coded ends allow for easy identification of the `right` screwdriver for each screw type.

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Whitworth

Senator® Adjustable Hacksaw

Suitable for light duty metal workshop applications and home use. Lightweight body with wing nut blade tensioner and comfortable, die cast 'D' style handle.
Accepts 250mm/300mm (10''/12'') hacksaw blades. Supplied with 300mm (12'') 24tpi flexible bi-metal hacksaw blade.