Special-Purpose Scissors

The asymmetrical plastic handle design allows the scissors to be used comfortably just above the work surface when cutting cloth in a straight line. The straight and curved blade tips are suitable for both long cuts and precise stitch cutting.

Plastic Handled Tailors' Scissors

Barrel Vents

Used to allow air to fill the vacuum left by dispensing fluid. For use in conjunction with 3/4" drum tap. 2" BSP thread. Nitrile seal.

Brass Body - 125

Pro-Torq Miniature ESD Pliers

These Miniature Pliers all have dissipative handles which safely discharge any electrostatic energy, reducing the possibility of damage to sensitive items plus a stainless steel leaf spring mechanism.

130mm ESD Long Nose Pliers

Long nose pliers with 40mm flat jaws.

SafeBlower Sets

With solid steel bar shaft and hollow head. Inside the polyurethane moulded hammer head are thousands of steel pellets which impact a split second after the hammer face, reducing rebound whilst also adding to the force of the blow.

Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Inch

Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 7 sizes ranging from 8" - 36".

Standard Duty

Kennedy Carpenters Claw Hammers

Manufactured from high-grade drop forged steel, fully heat-treated, with the claw being shaped in a continuous curve and tapered to grip the nail firmly.

Tubular Steel Shaft

With textured slip resistant rubber grip. Dampens the impact transmitted through to the user's hand & wrist.

16mm Spigot End Fittings

Metric

Open End