Single & Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industry. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy Professional sockets are knurled to give a high grip which is essential for a quick tool change even when greasy/oily. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

Metric

Flat File - Straight Handle

With tough enamelled alloy bodies and high carbon heat treated steel blades.



For straight filing with flat blade as standard. Plastic handle.
Blade length: 255mm.
Blade width: 40mm.
Overall length: 395mm.

Air Operated Grease Unit

Designed to deliver both fluid and thick grease at a constant controllable rate from 12.5kg kegs. Each mechanical part is factory inspected to ensure perfect operation even under the most severe working conditions. Supplied with: 310mm diameter drum cover, pump, 310mm diameter follower plate, 3m high pressure hose and control valve with caps swivel.



Pump Specification: Pump ratio: 50:1. Air inlet: 1/4" BSP female. Grease outlet: 1/4" BSP male. Grease delivery at 6bar (90psi): 500gm per minute (16). Tube: 30mm dia x 410mm length. Units also available to suit: 25kg, 50kg & 200kg kegs.

KEG NOT INCLUDED

Kennedy® Beechwood Folding Rules Class III

Manufactured from Beechwood for strength and flexibility and painted bright yellow. Metric and inch graduations, large, clear and deep for increased tool life and easy reading.
Sizes available: 1m x 5 folds
2m x 10 folds
Graduations: Metric - mm & cm (cm figures in red)
Inch - 1/16", 1/8", 1/4", 1/2", 1"
Accuracy: Class III

Universal Joints

Hinged through 180 in both directions. Knurled for extra grip.
Drive male x female: 3/4'' x 3/4''.

Kennedy® Push-on Piggy Back Terminals

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves.
All disconnect terminals supplied with anti-vibration copper sleeve.

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Torx

Single & Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industry. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy Professional sockets are knurled to give a high grip which is essential for a quick tool change even when greasy/oily. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

Metric

Screwdriver Bits

All have ball retaining groove on each face of the square drive. For insertion/removal of fasteners and fixings using 3/8" square drive tooling. Overall length: 50mm. Bit length: 20mm. Conforms to DIN standards.

Torx