Stanley FAT MAX Screwdrivers

Stanley Fat Max screwdrivers with soft grip handles and smooth domed ends to allow added comfort and a fast spinning action. Handles are moulded directly to the chrome vanadium shaft by a virtually unbreakable bond making them highly reliable and providing extra long life. colour coded ends allow for easy identification of the `right` screwdriver for each screw type.

Telescopic Gauges

Used for comparison measurement of bore diameter and groove width. Spring-loaded plunger expands within the hole. Knurled clamp allows contacts to be held in position, removed and measured.

Telescopic Gauge Sets

Kennedy Double Diaphragm Fuel Transfer Pump

Heavy duty aluminium die-cast construction fuel transfer pump with a discharge rate of up to 1 gallon per 5 strokes (800ml per stroke). Ideal for use where compressed air/power is not available such as farms, construction sites, boates etc. Has a stainless steel piston and fuel resistant hi-nitrile rubber diaphragm. Includes a 2" die cast bung adapter and extra heavy duty steel handle with security locking latch. Pump inlet is fitted with an easy to clean wire mesh screen filter. Complete with a telescopic suction tube, adjustable to fit 50 to 205 litre (15 to 55 gallon) drums, with non-return valve. Easy dispensing through 2.4m (8') of anti-static neoprene rubber hose with die-cast dispensing nozzle. Weight 7.5kg.

Standard Extensions

Manufactured from high quality chrome vanadium with a fully polished finish. All with knurled finger grip.

Short Arm Ratchet Combination Spanners

Short arm (stubby) combination spanners manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms to ANSI 8107.6.

Sash Clamps & Lengthening Bar

Used for a wide range of long reach clamping applications. SG ductile cast iron heads and slides, bars are manufactured from bright drawn steel and the main screw and handles are made from high grade steel. The tail slides are secured by a solid steel pin. Also available are lengthening bars, which increase the bar length.

136

Same as No. 135, but with a "T" section bar for extra resilience (as high as 1.9 tons). The fixed head can be bench mounted.

1/4" Hexagon Titanium Coated Screwdriver Bits

Kennedy quality titanium screwdriver bits that provide an improved wear resistance to protect gripping points from the rigors of repetitive use. For use with hand and power tools.

Cabinet & Chest Spares

To suit Kennedy, Senator and Yamoto cabinets and chests.

Drawer Sliders

For cabinet and chest compatibility, please refer to our catalogue.

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Inch

Kennedy Pipe Tools

Kennedy adjustable pipe wrenches have a pressed steel handle with high carbon steel profiled jaws. They are a general purpose wrench with milled and hardened teeth which grip the work piece tighter the more pressure is applied.

Adjustable Pipe Wrenches

Available in three sizes/capacities:

Overall length: (7??) 175mm:
Capacity: 1.5 - 38mm (1/16? - 1 1/2?).
Order Code: KEN-588-2710K

Overall length: (9??) 225mm:
Capacity: 3.0 - 64mm (1/8? - 2 1/2?).
Order Code: KEN-588-2720K

Overall Length: (12??) 300mm:
Capacity: 6.0 - 75mm (1/4? - 3?).
Order Code: KEN-588-3040K