Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm

Kennedy Crowbars, Wrecking bars and Pry bars

Manufactured from carbon steel. These traditional designs are used by tradesmen in all industrial environments. Suitable for a wide range of general duty applications, ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). Also used in assembly applications offering safe leverage and alignment capability.

Chisel and V-Notch Wrecking Bars

Multifunctional tools used mainly for prising and levering, drawing large nails and demolition work, ideal for any general dismantling and stripping applications. The versatile Super lever type can be used as a light duty nail lifter, pry bar, adze or lever

Industrial Flared Nut Ring Spanners

Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends.

Metric

Conform with ANSI B107.9M.

Kennedy® Standard Industrial Terminals - Yellow Fork

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy® Tapered Gauges

These are called taper gauges only because of their shape. They do not measure tapers they are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc. Manufactured from spring tempered stainless steel. 0.1mm increments. Rustless. Constant at 20°C. Satin Chrome anti glare finish. Permanent black figures and graduations.

Direct Drive Bits for Power Tools

1/4" Hex with ball recess.

Pozidriv

Stanley FAT MAX Screwdrivers

Stanley Fat Max screwdrivers with soft grip handles and smooth domed ends to allow added comfort and a fast spinning action. Handles are moulded directly to the chrome vanadium shaft by a virtually unbreakable bond making them highly reliable and providing extra long life. colour coded ends allow for easy identification of the `right` screwdriver for each screw type.

Granton Knives

All Granton knives are available with a choice of red, blue, yellow, green, brown, white or black handles. This system helps prevent cross contamination by assigning coloured handles to particular work areas.

6" Straight Blade Boning Knives

Designed for cutting meat away from the bone, trimming excess fat or preparing thin cutlets.
6" Straight Blade Boning Knives
Straight blade for general boning work. Suitable for chicken and pork.

Senator® Wood Turning Tools Set

Contents: 3 straight gouges, 2 skew chisels, 1 V-parting tool, 1 round nose and 1 diamond point. HSS steel blades. All supplied in a quality wooden presentation case. Blade length: 125mm. Handle length: 250mm.

Strap & Chain Wrenches

Used for gripping round and irregular shaped items, tubes and piping. Ideal for oil filters, hot radiator caps and hub caps.

Chain Type Oil Filter Remover

Hardened chrome vanadium handle with heavy duty chain for a positive grip.