Sash Clamps & Lengthening Bar

Used for a wide range of long reach clamping applications. SG ductile cast iron heads and slides, bars are manufactured from bright drawn steel and the main screw and handles are made from high grade steel. The tail slides are secured by a solid steel pin. Also available are lengthening bars, which increase the bar length.

135

Heavy duty clamp with a 32 x 6mm (1 1/4 " x 1/4 ") bar section. The slides and heads are flat bottomed to stand without support.

Kennedy® Square Head Centre Punches

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS3066.

100mm (4") Overall Length

Folding Pruning Saw

Folding pruning saw with special patented toothing for a fast cut in hard or dry wood. Strong two component plastic handle with comfortable grip. Safety lock both in opened and closed position.

Cable Ties

Suitable for securing or retaining various shapes and sizes of object. Supplied in packs of 100.

1/2" Square Drive Screwdriver Bits

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 1/2"square drive tooling. Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily. Registered Design No. 2053516UK. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Overall length: 55mm. Bit length: 17mm. Conforms to DIN standards.

Torx

Dial Indicating Torque Wrenches

Ideal for use in inspection and quality control, research and development, production and after sales service. Lightweight aluminium handles, abrasive resistant bodies for longer life and easy read dual scale for observing the amount of torque applied throughout the tightening process. Socket not included. Manufactured to ISO 6789 : 1992.

1/2" Square Drive

Torque Range: 40-200Nm 30-160ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Direct Drive Bits for Power Tools

1/4" Hex with ball recess.

Pozidriv

Axial Grip Wrenches

For auto body repair and steel fabrication. Chrome steel body with narrow profile jaws for confined areas. Straight line jaw motion allows clamping through holes. Push button release for one handed clamp releasing. No provisional (or track) welding required to hold auto body parts for assembly.

Flanged, Lap and Adjacent Joint Clamp

Clamps two flanged and adjacent joints. Jaw width: 45mm. Throat depth: 25mm.

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

Nosepiece Sets for the Kennedy RNI410 Rivet Nut Inserter

To fit Kennedy Rivet Nut Inserter RNI410 (KEN-569-3080K) illustrated. N.B. Body not included.