Kennedy® Pin Vices

Manufactured from hardened steel, with reduced diameter knurled body for rapid rotation of the pin vice between the thumb and forefinger. Ideal for holding drills, small files and wire. The through hole construction of the body allows lengths of wire to be held.

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric Deep

1? Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.

Stanley Locking Tape Measures

3-rivet, Tru zero end hook moves to compensate for accurate inside and outside measurements. Mylar coated blade is up to 10 times more resistant to abrasion than normal lacquered blades. Compact case with belt clip for ease of storage. Strong 19mm width blade for large standout.

Available in 3m/10' and 5m/16" models.

Kennedy Chalk Line Refills

Suitable for all chalk lines. Good colour fastness and weather resistance. Supplied in squeezable bottle. Available in three colours: Blue for general use externally and internally. Red for exterior masonry work indelible in use. White for interior use such as fixing a dado rail.

100gm

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Spanner

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

3/8" Square Drive 'P' Type Ratchet (Pre-set)

Designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a Torque Wrench Analyser or similar instrument. Setting system is designed to discourage unauthorised alteration. Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period. With reversible ratchets.

Torque Range: 8-60Nm 5-45ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Dial Indicating Torque Wrenches

Ideal for use in inspection and quality control, research and development, production and after sales service. Lightweight aluminium handles, abrasive resistant bodies for longer life and easy read dual scale for observing the amount of torque applied throughout the tightening process. Socket not included. Manufactured to ISO 6789 : 1992.

3/8" Square Drive

Torque Range: 8-40Nm 72-360ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

Metric

1/2" Square Drive Torx Sockets

Chrome vanadium. For use with male headed TX fasteners commonly found in the automotive industry. Overall length: 37mm.

Engineer's Straight Edges

Finish ground on both sides and edges marked at supporting points on the 36" size and longer. Product number suffixed 'B' indicates one edge has a 30 bevel.



Type 310 conforms to BS 5204 - B.