77-IV

The 77-IV has the features needed to repair most electrical and electronic problems. A large display and backlight assists work in dim areas. Minium/Maxium to record signal fluctuations. Ergonomic overmolded housing with integrated probe holders. Auto and manual ranging and it meets Measurement Category 1000

It measures:
Wide 1000 V measurement range
Average responding AC measurements
0.3% accuracy
10 Amps continuous (20A for 30 seconds)
Frequency and capacitance
Resistance and continuity

Measurement Category IV safety rating

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

A/F

Bar Type Tap Wrenches

Ductile steel body with a knurled locking nut ensuring no loss of grip during use.

3/4" Square Drive Professional Socket Set

A heavy duty range designed to cope with the demands of industrial agriculture machinery and heavy plant, static or mobile. All Kennedy Professional sockets have a knurl feature to give a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. Chamfered leading edge ensures easy fasterner location. Sockets manufactured to: ANSI B107.5M: 1987, ANSI B107.1: 1978 & BS 4006: 1992. Accessories manufactured to: ANSI B107.10M: 1982 & BS 4006: 1992.

L22M 22 Piece, Metric

Contents: Bi-hexagon Sockets: 22, 24, 26, 27, 29, 30, 32, 33, 36, 38, 41, 46, 50, 55 & 60mm. Accessories: Lever type ratchet, Sliding T-handle, Swivel handle, Universal joint, 100, 200 & 410mm extension bars. Robust fitted case with security padlock hole and cushion grip handle.

Rutland™ Anvil & Bypass Loppers

The bypass lopper is designed for cutting live (green) wood or stems. The cutting blade of the lopper passes a counterblade in a scissor bypass action. The pivot point of the Rutland lopper is slightly offset from the centre line of cutting; this creates a slicing action during cutting, which greatly reduces the effort required when pruning live wood and spreads wear over the full length of the blade.

Bypass

For accurate pruning and clean cuts. Compound jaw action. Overall length: 760mm. Maximum cutting diameter: 60mm

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

A/F

3/4? Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

4 Drawer Tool Chest

Manufactured from hi-impact co-polymer Polypropylene. Features 4 sliding drawers enclosed with a slide clasp front panel to prevent opening whilst in transit. Top carry handle with soft touch grip zone and large locking clasps. Metric graduated V groove in the lid securely holds work piece while being cut. Front cover panel and lid have aligning padlock hole for optional added security. Dimensions: (W x D x H): 450 x 250 x 325mm.

Stud Puller Set

3 point clamping rollers grip worn or rounded bolts and fixings by compressing on to the fixing as the socket is turned which applies more pressure to grip, turn and remove. Unscrews both left and right hand threads. Manufactured from chrome vanadium steel. Contents: 6mm (1/4"), 8mm (5/16"), 10mm (3/8"), 12mm (7/16").

Kennedy® Parallel Pin Punches

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.

150mm (6") Overall Length

Spare Striking Faces For Thor Hammers

For malleable iron head hammers and split head hammers.

Rawhide Face