Bow Saws

Fine cutting for veneers, plastics and sheet materials. Curved end allows cutting up to skirts and corners. Set and sharpened teeth. High impact moulded plastic handle. Hardened and tempered spring steel blade. 15 points per inch (14tpi)

Loggers

Oxygen Sensor Socket

1/2" square drive, 22mm hex. x 90mm length. Cutaway section allows the socket to pass over wiring
Packaging dimensions (W x H x D): 72 x 158 x 30mm.
Gross weight: 238g.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Professional Paint Brushes

High quality lacquered wood* handles. Chrome plated lapped and pressed ferrules. Long pure black high quality bristles. Hard wearing brushes designed to give long life and the finest of finishes for the true craftsman.

(*13mm [1/2"] brush has plastic handle).

Flat Bits

Forged from high quality tool steel with chip clearance groove and hollow ground point. Centerless ground and true running. Ground spade bit head. For cutting holes in laminates and wood. 6mm hexagon shank to prevent slipping at speed.

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B541
Maximum load: 5 Metric Tonnes.
Height range: 216 to 416mm Min/Max.
Max saddle adjustment: 70mm.
Weight: 4.90kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Cross Cut Chisels

Used for cutting keyways or flat bottomed grooves in blocks of steel or on steel shafts. The cutting edge is wider than the blade to give clearance in work and prevent jamming.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Heavy-Duty T-Handle Multi Hold Clamps

Manufactured from heat treated carbon steel for extra strength. Finished with nickel and chrome plating. Textured T-spindle for extra clamping force. Supplied with three replaceable clamping pads for versatility.

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.