Kennedy 400cc Pistol Type Pneumatic Grease Gun

Chrome plated steel body, rubber grip and offset nozzle. Cartridge, bulk or suction fill. Suitable for medium/heavy greases. Diameter: 56mm. Overall Length: 370mm.

Cross Pein Hammers

Traditionally used by joiners and fitters. Cross pein can be used for setting pins and nails prior to "driving home" with the flat faced pein.

Warrington Hardwood Shaft

Close grained hardwood shaft shaped to comfortably fit in the hand. Forged steel head with ground and polished striking face.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Kennedy C-Hook Spanners

Manufactured from chrome vanadium steel with a black oxidised finish. Specifically designed for use with slotted retaining rings. Conforms to DIN 1810A.

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

BSW Deep

1/2? Drive BSW Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Kennedy® Magnetic Pick-Up Wand

Effective working length: 140cm.
High power magnet for easy pick up and release of metal objects.
Can be used for scrap and ferrous debris.
Permanent magnet, never needs to be re-magnetised.
Lightweight.
Chrome plated and corrosion resistant.

Internal Spring Calipers

Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points. Calipers are used for taking internal and external measurements, also for comparing distances or sizes.

Kennedy Club Hammers

Kennedy Club or lump hammers have fully forged and heat-treated hammer heads with flat striking faces and chamfered edges.

They are suitable for use with cold chisels, brick bolsters, star drills and masonry nails in confined work areas with little room for a full arc swing, the wide face makes it ideal for striking chisels and punches.

Available in a range of weights with hickory or fibreglass shafts.

Hickory Shaft BS 876

Tested to the requirements of BS 876: 1981 (head stamped BS 876).

High Grip Pound Thru' Screwdrivers

Through blade screwdriver with chrome vanadium steel blades and striking heads, suitable for striking with a hammer to free up seized screws. Fully hardened magnetic tips. Comfortable moulded grip. Hexagon blades.

Flared Tip, Round Blade

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Reversible Ratchet Ring Wrenches

For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.



AF