Scutch Bit Holders, Combs & Droves

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Detachable Bits for Scutch Chisels & Hammers

These are made for use in comb holder chisels and hammers, both edges can be used until worn out and then thrown away. Designed to dress stone or brickwork or plaster rendering, etc. Available in 25/38mm widths either plain edged or coarse.

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended

Pipe Vice & Stand

Hinged pipe vice, used for repetitive tasks on pipework. The frame of the pipe vice is made from cast iron with jaws made from hardened tool grade alloy steel with a corrosion resistant coating. The top jaw of the pipe vice is held in position with a hook which automatically engages when the vice is closed. Can be fitted to bench or stand.



Stand is of robust construction and is suitable for workshop and site use. Essential for use whilst cutting, bending and threading pipework. The stand is fitted with an integral tray for holding tools and fittings, wide angled legs give greater stability and the folding design provides easy storage and transportation. Fitted with anti-skid duck board for operator safety.

Kennedy Heavy-Duty G-Clamps

The Kennedy Quality Industrial Tooling G-clamps have drop forged steel bodies with anti-twist ribbed reinforcement and a precision machined drive screw with swivel shoe for positive location on the material being clamped.

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Metric

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric Deep

1/2? Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129

Plastic Oil Cans

One piece moulded plastic bodies with positive force feed pumps, supplied with nylon push fit spouts.

Heavy-Duty Deep Throat Clamps

Specialist clamp manufactured from drop forged steel, with extra throat depth for clamping work pieces further in from the edges, allowing a greater range of applications.

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm

Industrial Open Ended Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with a 15 offset. Conform to DIN 3110 & BS 192 : 1982.

Metric