Professional Reversible Combination Spanner - Metric

Bi-hexagonal 15 degree offset rings with a 72 teeth lever ratcheting system that requires only 5 degree movement to operate, making them ideal for use in tight areas. Made from high quality Chrome Vanadium Steel with mirror polish finish to prevent oil and dirt from adhering to the spanner. Heads conform to ASME B107.6.

Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Half Round/ Bullnose Chisels

Used for cutting round bottomed grooves in steel such as oil grooves and also for 'roughing up' surfaces to be chipped by a flat chisel. The job is made easier by cutting grooves across the surface with this type of chisel then the raised portion can be easily chipped away with a flat blade.
Cutting angle 40 - 50 degrees to the vertical.

Kennedy Cases - Accessories

NB: complete case is shown for illustration only. Case, contents and tools are not included.

Bumping Hammers

Highly polished striking heads and cheeks. One square and one round face. The most popular general purpose panel beating hammer. Hickory shaft. Manufactured to BS 4114.

Flat Faced

For straightening thicker gauge metals \twhere a reasonable striking force is needed.

Kennedy® Engineers' Steel Rules

Finest quality spring tempered rustless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. EEC Class one accuracy: +/- 0.2mm full scale. Constant at 20°C.

Round End - Rigid Blade

Spring tempered rigid steel blades. 150mm/6" 19mm blade width. Other lengths 25mm blade width. With hanging hole.

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 8 sizes ranging from 8" - 48".

Heavy-Duty

Kennedy Crowbars, Wrecking bars and Pry bars

Manufactured from carbon steel. These traditional designs are used by tradesmen in all industrial environments. Suitable for a wide range of general duty applications, ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). Also used in assembly applications offering safe leverage and alignment capability.

Chisel and V-Notch Wrecking Bars

Multifunctional tools used mainly for prising and levering, drawing large nails and demolition work, ideal for any general dismantling and stripping applications. The versatile Super lever type can be used as a light duty nail lifter, pry bar, adze or lever

Kennedy Chrome Finish Adjustable Wrenches

Kennedy industrial quality adjustable wrenches are manufactured from high strength 'I'-beam section chrome vanadium steel for improved strength and rigidity; the jaws are hardened and ground for extended tool life. An offset head angle of 22.5 provides positive torque control and the 15 slimline tapered jaws allows the wrench to be used in confined areas of access. The Kennedy adjustable wrench jaw opening exceeds ISO standards, providing you with up to 20% greater jaw capacity than conventional adjustable wrenches. Parallel jaws with smooth movable jaw adjustment and self-locking design prevent the jaws opening unintentionally even when under full load. Suitable for industrial and maintenance/assembly applications.

3 Piece Set - 100, 200 and 300mm

Contents 1 each of the following size of adjustable wrench:
Jaw capacity: 17mm (21/32"). Overall length: 100mm (4").
Jaw capacity: 28mm (1 3/32"). Overall length: 200mm (8").
Jaw capacity: 38mm (1 3/8"). Overall length: 300mm (12").

3/8" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric

Kennedy® Standard Industrial Terminals - Yellow Fork

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.