14mm Offset Chrome Vanadium Combination Spanner

Chrome vanadium steel. 15 cranked open end. Offset ring end. Conforms to DIN 3113B.

High Grip Pound Thru' Screwdrivers

Through blade screwdriver with chrome vanadium steel blades and striking heads, suitable for striking with a hammer to free up seized screws. Fully hardened magnetic tips. Comfortable moulded grip. Hexagon blades.

Flared Tip, Round Blade

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Sheet Metal Working Tools

Specially designed for use on sheet lead, copper, zinc, aluminium, etc. All items are made from polished high density hardwood.

Bossing Mallets

Delivers the necessary blow to shape sheet metal and are still made to the exacting standards that coachbuilders, fabricators and vehicle restorers have demanded over many years. Available in 4 sizes measured across the widest part of the egg shaped head.

2 Piece Hacksaws Set

Beaver style 150mm (6") junior hacksaw and 250/300mm (10"/12") adjustable hacksaw with wing nut tensioner.

Tamper Proof L-Wrench Torx Keys

Tamper-proof torx keys are the same shape as a standard torx keys, but have a security hole in the middle. Manufactured from chrome molybdenum steel. Torx is a registered trademark of Camcar/Textron.

Kennedy® Square Head Centre Punches

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS3066.

100mm (4") Overall Length

Kennedy Combination Spanner Sets

Kennedy combination spanners are manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset. Conform to DIN 3113 & BS 192 : 1982.

11 Piece - Metric

Contents: 26, 27, 28, 29, 30, 32, 36, 38, 41, 46 & 50mm

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Torx

Kennedy® Electrical Components

These Kennedy® Terminal and crimp tool kits contain all the commonly used terminals and connectors in a variety of sizes, with a crimping tool.

Electrical terminal connectors are constructed from the highest quality materials available to ensure a good crimp and connection every time.

552 Piece Heavy Duty Ratchet Crimping tool Kit

Heavy duty 220mm ratchet crimper with a selection of pre-insulated red, blue & yellow electrical connector terminals, cable ties and insulation tape. Ratchet crimper has laminated steel jaws with strengthened PVC handle grips. Suitable for crimping insulated terminals as follows:
Red channel: 0.5 - 1.00mm,
Blue channel: 1.5 - 2.5mm,
Yellow channel: 4.0 - 6.0mm.
Supplied in a fitted case with slide locking clips & handle.

Kit contents:
Heavy duty ratchet crimper
Black insulation tape: 19mm x 9m
Black cable ties: 2.5 x 100mm (50pcs)
Ring connectors:
Red - 3.7mm (14pcs), 4mm (13pcs), 5mm (13pcs).
Blue - 3.7mm (12pcs), 4mm (12pcs), 5mm (12pcs), 6mm (25pcs),
Yellow - 4mm (13pcs), 5mm (12pcs).
Butt connectors: Red (25pcs) - 1.5 x 1.5mm2,
Blue (25pcs) - 1.5 x 2.5mm2.
Push-on spade connectors: - MALE:
Red (25Pcs), Blue (25Pcs) Yellow (12Pcs) - 6.3 x 0.8mm.
Push-on spade connectors: - FEMALE:
Red (25Pcs), Blue (25Pcs), Yellow (12Pcs) 6.3 x 0.8mm.
Push-on spade covered connectors: - FEMALE:
Red (25pcs), Blue (25pcs) - 6.3 x 0.8mm.
Push-on piggy-back connectors: - FEMALE:
Red (25pcs), Blue (25pcs) - 6.3 x 0.8mm.
Bullet connectors: - MALE: Red (25pcs), Blue (25pcs) - 4mm.
Bullet connectors: - FEMALE: Red (25pcs), Blue (25pcs) - 4mm.

Reversible Circlip Pliers

These bent nose pliers are reversible for both internal and external circlip insertion and removal, ranging from 10 - 18mm. Made from high grade carbon steel with comfortable insulated handles.

Bent Nose Reversible Circlip Pliers