产品 / 手动工具
编号：KEN6012980K
●产品描述：
Key Ring Sets
Kennendy Hex L-wrenches are Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.
Dimensions of wallet (W x D x H): 85 x 10 x 250mm
编号：KEN5738750K
●产品描述：
10mm AF Hexagon Drive Screwdriver Bits
All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.
Torx
编号：KEN5257220K
●产品描述：
Welders Chipping Hammers
Scaling and chipping hammers. For boiler scaling, weld dressing etc
Welder's Chipping hammer
Hardened and tempered steel head chisel edge and point striking faces with epoxy coating. Spring steel impact absorbing handle for user comfort.
编号：KEN5808590K
●产品描述：
Podger Open Ended Spanners
Open jaw spanners are designed to engage the nut from the side and as it only engages on two faces of the fastener, care must be taken to ensure that the correct size spanner is always used. Podger wrenches have a tapered handle for assisting with alignment of fixing holes on jigs and fabrications.
编号：KEN5606189K
●产品描述：
Kennedy Hand Stamps
Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.
编号：KEN5807810K
●产品描述：
Ring Slogging Wrenches
Manufactured to DIN 7444.
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.
编号：KEN5725760K
●产品描述：
Electricians VDE Square Section Handle Screwdrivers
Volt-tested to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC. Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.
编号：KEN5605305K
●产品描述：
Kennedy Hand Stamps
Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.
编号：KEN5181710K
●产品描述：
Kennedy® Automatic Centre Punch
Strength of punch and depth of depression is adjustable by turning the knurled head. Delivers a punch between 2.25 to 13.5kg (5 to 30lb).
Standard Duty
编号：KEN5738806K
●产品描述：
10mm AF Hexagon Drive Screwdriver Bits
All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.
Hexagon