Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

12.7mm x 7.6m

Kennedy® Parallel Pin Punches

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.

100mm (4") Overall Length

Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Flat Chisel

Used by the engineering and building trades for cutting and chipping cold metals, brick work and stone. The angle of the cut edge should be 60 - 70, inclusive, but is dependant on the material to be cut. When cutting metal, the softer the material is, the more acute the cutting angle should be.

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

AF Deep

1? Drive Inch Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Back Spanner Basin Wrench

For use in vertical or horizontal confined spaces. Grips on smooth and oily surfaces. Double ended wrench for 13mm (1/2") and 32mm lavatory and basin nuts. Made from cast iron.

'Hi-Grip' Screwdrivers

Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.

Torx

TX head screws are used predominantly for engineering and automotive applications.
The design of the screw allows high torque levels to be applied without the driver slipping potentially damaging the components.

9 Piece CV Ball Driver Set

Manufactured from chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L).
Set supplied in an indexed plastic holder.
Individual hexagon key slots help to instantly identify missing drivers.

Direct Drive Bits for Power Tools

1/4" Hex with ball recess.

Flat

7 Piece Panel Beating Set

A comprehensive panel beating set containing: 1 x 12oz shrinking hammer.1 x 12oz flat faced bumping hammer. 1 x 10oz round finishing pick.1 each: curved 1.2kg, utility 1.2kg, heel and toe dolly.The hammerheads are manufactured from forged high carbon steel and then ground and polished on the faces and cheeks to a mirror finish. The hammer shafts are manufactured from solid hickory, with an octagonal cross section for improved grip and control when in use. The dollies are manufactured from drop forged medium carbon steel (SAE/AISI 1055) then heat treated and polished to a high mirror finish. Each one is laser etched for easy identification.Supplied in an impact resistant case that prevents the hammers and dollies clashing together and damaging the high polish finish, whilst in transit.

What "Practical Classics" magazine say..."Best Buy"

"Full house to this excellent value set. The four dollies are beautifully finished and profiled, and are a good usable weight. The hammers are also superb, combining decent weight, well shaped shafts and good length. The faces are big enough for effective planishing too. Final plus point is the moulded case, which prevents the contents bashing together."

Kennedy L-Wrench Torx Keys

Manufactured from chrome molybdenum steel. Torx is a registered trademark of Camcar/Textron.

Torx Keys