Kennedy Crowbars, Wrecking bars and Pry bars

Manufactured from carbon steel. These traditional designs are used by tradesmen in all industrial environments. Suitable for a wide range of general duty applications, ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). Also used in assembly applications offering safe leverage and alignment capability.

Chisel and V-Notch Wrecking Bars

Multifunctional tools used mainly for prising and levering, drawing large nails and demolition work, ideal for any general dismantling and stripping applications. The versatile Super lever type can be used as a light duty nail lifter, pry bar, adze or lever

Square Drive Reducers & Adaptors

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Sizes 1/2" and above feature a hole to accommodate a pin and ring to prevent accidental removal for added security.

Kennedy Torque Wrenches

Kennedy?s fixed torque wrenches have been designed for use on production lines and for other applications where a specific torque is required for repetitive operations.

Fixed Head Torque Wrench

Features include:

Chrome plated, polished steel head.
Retractable torque setting lever.
CLICK & SNAP action indicates when the pre-set torque level has been reached. Four easy read scales N.m, kgf.m, lbf.in x10, lbf.ft
Push through square drive connector to instantly reverse action.
Knurled grip plastic handle.
Complete with factory tested calibration certificate, operating instructions and torque conversion chart.
Supplied in blow moulded cases, except FTW800, which is in a cardboard case.
Manufactured to ISO 6789 : 1992 (BS EN 26789 : 1994).
Accuracy plus/minus 4%.

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

Spot Weld Remover

Suitable for cutting holes in steel metal, steel, plastic and brass. The hardened steel cutter is reversible increasing tool life. adjusting the spring loaded centre point, screw accurately controls the depth of cut. Allowing the top to be removed whilst leaving the lower panel in place. Maximum rated operating speed 900rpm.

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric Deep

1/2? Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129

Heavy Duty G-Clamps - Copper Plated Screw

All sizes feature good throat clearance, a copper-plated screw, reinforced shoulders for greater strength, a swivel clamp head and a sliding tommy bar for tightening. Manufactured from drop forged ribbed anti-twist frame steel, ideally suited to fabrication and welding applications. Finished in a heavy epoxy coating for long-term rust and weld spatter resistance.

3/8" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

AF Deep

Syphons

Flexible plastic outlet and semi rigid inlet tubes. Hand pumping unit incorporates one way valves. Suitable for use with petrol, diesel and non-corrosive liquids.



SPS/25 Tube length: Inlet 610mm/Outlet 830mm. SPS/205 Tube length: Inlet 860mm/Outlet 1000mm.

Kennedy Clamps

Kennedy Professional Dual Action Quick Clamps are designed for use one handed for speed and convenience. The pistol grip handle houses a ratchet clamping mechanism that incrementally applies clamping force when you pull the trigger. To release or reposition the clamp jaw, hold down the quick release button and slide the jaw along the bar. Can be used as a bar clamp or as a spreader simply by turning the handle around.

Features include:
90mmm throat depth.
Clamping force of up to 180kg.
Quick release buttons for both jaws allows them to be positioned quickly anywhere on the bar and can be turned around to act as a spreader.
Heavy duty steel bar.
Non-slip clamp faces

One Handed Quick Bar Clamp

Available in five capacities:
175mm Order code: KEN-539-3330K
325mm Order code: KEN-539-3360K
475mm Order code: KEN-539-3390K
625mm Order code: KEN-539-3420K
925mm Order code: KEN-539-3450K

Heavy-Duty T Handle Clamps

Manufactured from heat treated carbon steel for extra strength. Finished with nickel and chrome plating. Textured T-spindle for extra clamping force.