Precision Knife

Suitable for modellers art & craft workers and wood carvers. Ideal for making point of sale samples where precision cutting is required.



Medium duty, lightweight. Large diameter aluminium handle suitable for cutting heavy paper and medium density materials.

Kennedy® Drill Gauges

Manufactured from hardened steel with a satin finish. An ideal way to quickly measure the diameter of drills and
steel wire.

Plastic Funnels

With anti-splash rims.

Telescopic Transmission Jack

Ideal for car and light commercial transmission removal and installation. Fully adjustable universal rotary saddle with adjustable corner brackets and safety chains. Foot operated pump and release valve leaves both hands free to manoeuvre transmission. Wide base with four 3" dia. swivel-type ball bearing castors providing stability and easy manoeuvring. Two-stage flash chromed rams inhibit rust from entering the hydraulic system. Lifts from 875mm to 1800mm.
Capacity: 1/2 Ton.
Ram Extensions: 2.
Minimum Saddle Height: 875mm.
Maximum Saddle Height: 1800mm.
Saddle Size: 680x810mm.
Chain Length: 95mm.
Saddle Tilt Forward: 24".
Saddle Tilt Back: 19".
Saddle Tilt Side: plus/minus 20".
Saddle Return Weight: 15.8kg (35lbs).
Base: 95 x 805mm.
Weight: 68.5kg.

Knife Blades

To use in conjunction with the Kennedy 16 piece precision Knife Set

Medium/Heavy Duty Cutting

Kennedy Impact Drive Sockets

Kennedy 1,1/2" square drive impact sockets are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

1,1/2" Drive Metric Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

1,1/2" Impact Drive Sockets

External Spring Calipers

Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points. Calipers are used for taking internal and external measurements, also for comparing distances or sizes.

Universal Ball Joints

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Sizes 1/2" and above feature a hole to accommodate a pin and ring to prevent accidental removal for added security.

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B3047
Maximum load: 30 Metric Tonnes.
Height range: 285 to 475mm Min/Max.
Max saddle adjustment: n/a
Weight: 23.20Kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric

1? Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.