Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

3/8" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric

Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Cross Cut Chisels

Used for cutting keyways or flat bottomed grooves in blocks of steel or on steel shafts. The cutting edge is wider than the blade to give clearance in work and prevent jamming.

CV Ball Driver

Manufactured from chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L).
Set supplied in an indexed plastic holder.
Individual hexagon key slots help to instantly identify missing drivers.

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 25ft

Plastic Funnel

Resistant to oil and chemicals. Heavy duty polyethylene which will not shatter or break in cold weather. Fixed spout. Hanging hole.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

3/8" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

AF Deep

Kennedy Hydraulic Bench Press - 20 Tonnes

Ideal for pressing, bending and extruding.
Sturdy steel frame with end braces and wide feet for extra stability.
Work bed height is adjustable in 8 increments of 120mm, allowing large work pieces to be worked on with maximum flexibility.
The Hydraulic pump can be manually operated or by compressed air connecting the airline supplied to an air supply line or direct to a compressor providing at least 8-9.5bar at 4cfm.
Hydraulic gauge is included.
Ideal for industrial and automotive applications.
Capacity: 20 Tonnes.

Kennedy Combination Spanner Sets

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Combination Spanner Set 6 to 24mm (18 Pieces)

Each Kennedy combination spanner in this 18 piece set is manufactured from industrial quality chrome vanadium steel with a corrosion resistant satin finish body and polished head. The open jaws are cranked at 15 and the Bi-hexagonal drive ring drive end is offset, to improve contact and make positioning the spanner on the fastener being tightened or loosened easier.

Set contents:
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 and 24mm.