产品 / 手动工具
编号：KEN5180080K
●产品描述：
Spring Dividers
Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.
编号：KEN5608000K
●产品描述：
Kennedy Replacement Punches
To suit Kennedy Power Punch Kit (KEN-560-7800K)
编号：KEN5605130K
●产品描述：
Kennedy Hand Stamps
Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.
编号：KEN5699300K
●产品描述：
Nosepiece Sets for the Kennedy RNI410 Rivet Nut Inserter
To fit Kennedy Rivet Nut Inserter RNI410 (KEN-569-3080K) illustrated. N.B. Body not included.
编号：KEN5806540K
●产品描述：
Open Jaw Slogging Wrenches
Manufactured to DIN 133.
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.
编号：KEN6029160K
●产品描述：
CV Ball Driver
Manufactured from chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L).
Set supplied in an indexed plastic holder.
Individual hexagon key slots help to instantly identify missing drivers.
编号：KEN5806110K
●产品描述：
Open Jaw Slogging Wrenches
Manufactured to DIN 133.
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.
编号：KEN6013050K
●产品描述：
Kennedy Hexagon Key L-Wrenches
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.
Inch
编号：KEN5807100K
●产品描述：
Ring Slogging Wrenches
Manufactured to DIN 7444.
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.
编号：KEN5976090K
●产品描述：
Beechwood Sawing Blocks
Pre-cut at 45 and 90.
Mitre Box