Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Brake Pin Punches

Parallel pin punches for the removal of brake calliper pad retaining pins. 165mm overall length. 6.0mm diameter punch uses a pilot tip to aid location in hollow pins used on GM/Vauxhall callipers. Overall length: 165mm.

1/4" AF Hexagon 'Direct Drive' Screwdriver Bits

1/4" Hex with ball recess.

Torx

Kennedy Impact Drive Sockets

Kennedy 1,1/2" square drive impact sockets are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

1,1/2" Drive Metric Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

1,1/2" Impact Drive Sockets

Heavy-Duty Wire Strippers

Multi-purpose tool with alloy steel jaws suitable for stripping, cutting and crimping all types of wire. Automatic wire stripper. Crimps - non-insulated terminals 1.5, 2.5 and 4 - 6mm (12 - 10, 22 - 18 and 16 - 14 AWG). Crimps - insulated terminals 1.5, 2.5 and 6mm (10 - 22 AWG). Capacity: 0.13 - 6.0mm2.

Replacement Squares for Torque Wrenches

To suit Kennedy Fixed Head Torque Wrenches

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 25ft

Industrial Scissors

Stainless steel blades, large loop comfortable handles. For trimming.

Sidebent Shears

Hydraulic Nut Splitter Set

The hydraulic ram provides up to 10 tonnes of direct non-twisting application of thrust that is more effective and secure then a mechanical thrust screw. Fully threaded body allows for quick and easy adjust height adjustment. The splitter bodies are manufactured from carbon steel.



Contents: 1 x hydraulic ram. 1 x splitter body 3/8" diameter capacity. 1 x splitter body 1/2" diameter capacity. 1 x splitter body 5/8" diameter capacity. 1 x splitter body 3/4" diameter capacity. 1 x splitter body 1" diameter capacity, 1 x threaded attachment sleeve, 1 x oil bottle

Fitch Brushes

Natural white bristle flat fitch paint brush with long natural wooden handle and steel ferrule. Ideal for ‘cutting-in’ to corners and windows, painting coving and other detail painting, or used dry to clean/dust on delicate objects or hard to access areas.

Flat Type