Kennedy Professional Cantilever Toolbox

Manufactured from heavy gauge steel with all welded construction for continuous industrial use. Durable corrosion resistant two part epoxy powder coat finish. Fully enclosed cantilever mechanism for added security. Quick release lid clasps with padlock hole for security. 2 Piece cantilever lids that can be padlocked for additional security (padlock not included). Full width piano hinges provide rigidity and strength. Large base compartment (450 x 260 x 170mm) with 4 cantilever trays for additional storage. The cantilever action of the top trays makes tray contents instantly available. Supplied with fixed carry handle on the lid.

18" Professional Cantilever Toolbox

Overall dimensions (L x W x H): 333 x 459 x 255mm.

Kennedy 4 Drawer Stainless Steel Top Tool Chest

Manufactured from heavy gauge stainless steel with double wall construction side panels and welded joints for added rigidity. Quick release smooth running ball bearing drawer slides. Fully locking. Drawer loads should be evenly distributed. Suitable for use in health and catering environments.

Overall dimensions (W x D x H):
673 x 470 x 513mm.
Drawer sizes (W x D x H):
4 @ 597x 428 x 90mm.

Kennedy Extra Large Roller Tool Cabinets

Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent re-location when loaded and should only ever be pushed. Uses 14" drawer slides and Type B lid stays.

11 Drawer Extra Large Roller Tool Cabinet

Overall dimensions (W x D x H): 680 x 480 x 1130mm.
Drawer sizes (W x D x H):
270 x 415 x 50mm (4).
560 x 415 x 50mm (4).
560 x 415 x 100mm (2).
560 x 415 x 170mm (1).

Kennedy Portable Tool Chest

Manufactured from heavy gauge steel with all welded construction. Durable and corrosion resistant two part epoxy powder paint finish. With quick release lid clasps, padlock hasps and textured carry handles. Full width piano hinges provide rigidity and strength, ensuring smooth operation and additional security.


Three full-length drawers with rigid aluminium edged handles. Fully Lockable unit with a handle on the top and a carry handle on each end. The lid automatically locks
all of the closed drawers when lowered to prevent opening.
Height: 340mm, Depth: 215mm, Width: 520mm
Drawer sizes:
2 460 x 180 x 55mm
1 460 x 180 x 75mm.

Magnetic Trays

Heavy duty tool/parts tray with durable hardwearing corrosion resistant powder coated finish. High strength permanent magnets with protective rubber coating ensure the tray securely attaches to any flat ferrous metal surface, without damaging it. The extended rear stabilizing plate with protective rubber guard increases the force required to remove the magnets from the surface their attached to, increasing the holding capacity of the tray.Suitable for keeping small parts, components and tools near to hand when working on vehicles, domestic appliances and other equipment..



Steel tool/parts tray with durable hardwearing corrosion-resistant powder coated finish. Suitable for keeping small parts, components and tools near to hand when working on vehicles, domestic appliances and other equipment. Three high strength magnets in protective non-scratch rubber coating.
Four high strength permanent magnets.
Tray Size: 270 x 115 x 31mm (10 5/8" x 4 1/2 " x 1 1/4")
Rear stabilizing plate size: 270 x 125mm (10 5/8" x 5")
Load capacity: 1,000g.

Tool Chest

Manufactured from extra thick heavy gauge steel fitted with heavy duty piano hinges, lid stays and extra strength carry handles. Supplied with tote tray and drawer liners. One piece smooth running ball bearing drawer slides with double sliders on base drawer. Epoxy powder coated finish with reinforced corner tabs.

6 Drawer Tool Chest

Top compartment size: 660 x 150 x 90mm.
Drawer sizes (W x D x H):
2 125 x 285 x 50mm.
1 280 x 285 x 150mm.
2 590 x 285 x 50mm.
1 590 x 285 x 100mm.

2 Drawer Step-up Units

Thicker gauge steel, electro-coated enamel finish for superior appearance and protection. Steel panels in the drawers for extra rigidity, ball bearing drawer runners. Supplied with drawer liners and top mat.



Drawer sizes: 2 590.5 x 410 x 102mm.

Kennedy Professional Tool Chest

Manufactured from extra thick heavy gauge steel fitted with heavy duty piano hinges, lid stays and extra strength carry handles. Supplied with tote tray and drawer liners. One piece smooth running ball bearing drawer slides with double sliders on base drawer. Epoxy powder coated finish with reinforced corner tabs.

3 Drawer Professional Tool Chest

Dimensions:
Top compartment size: 89 x 661 x 150mm.
Drawer sizes:
51 x 591 x 282mm (1).
102 x 591 x 282mm (2).

Kennedy Pro Torq Dual Grip Pliers & Nippers

Kennedy Pro Torq Dual Grip Pliers & Nippers are manufactured from specially selected chrome vanadium steels. The dual material grip design that covers the chrome vanadium steel handle, allows the user to apply the greatest force with the minimum amount of effort. The grip is manufactured with a polypropylene core for strength & durability with a soft thermoplastic outer for a non-slip comfort grip. Especially suitable for production line environments where repetitive work is undertaken.

Pro-Torq Nippers & Plier Set (3 Pieces)

This Kennedy Pro-Torq plier set is made up of the most popular types of pliers. All the pliers have double polished heads and joints with induction hardened cutting edges for a long service life.

Snipe nose pliers 165mm (6 1/2"): with serrated jaws, tapered to work in confined spaces. Capable of gripping and manoeuvring small objects in confined areas.

Diagonal nippers 140mm (5 1/2"): for cutting wire. The cutting edge is set at a slight angle to the handles, this allows the you to cut close to a flat surface, and leave the hand clear of any obstructions.

Combination pliers 165mm (6 1/2"): are able to grip and cut. They are often referred to as engineers' pliers, or if the handle is insulated electricians' pliers. The jaws are serrated for gripping flat surfaces and the rounded section in the jaws are for gripping nuts, tubes and pipes. The cutter is positioned behind the gripping section of the jaw.

Kennedy Professional Specialist Automotive Tools

The Kennedy glow plug pliers are suitable for the removal of hard to reach glow plug connectors found on the latest generation of engines.

The 125mm long jaws are manufactured from hardened chrome vanadium steel.

Composite handle provides added comfort and control.

Available as:
Straight jaw Order Code: KEN-503-1240K
Curved jaw Order Code: KEN-503-1260K

Glow Plug Connector Pliers