Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Nylon Faced Hammer

Kennedy Nylon faced striking hammers have no metal in the hammer faces that can mark the work piece. Each hammer has two replaceable screw-in nylon hammer faces that can be easily replaced when they become worn, without the use of any other tools - minimising down time. The striking faces are reinforced for extra strength and to prevent fracturing from off centre strikes. The nylon hammerheads have a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead, which in turn is fixed to a fully moulded polypropylene shaft with a shock absorbing soft dual material grip, for improved grip and control.
Overall length: 305mm.

For all dimensional specifications please refer to our catalogue.

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Nylon Faced Hammer

Kennedy Nylon faced striking hammers have no metal in the hammer faces that can mark the work piece. Each hammer has two replaceable screw-in nylon hammer faces that can be easily replaced when they become worn, without the use of any other tools - minimising down time. The striking faces are reinforced for extra strength and to prevent fracturing from off centre strikes. The nylon hammerheads have a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead, which in turn is fixed to a fully moulded polypropylene shaft with a shock absorbing soft dual material grip, for improved grip and control.
Overall length: 305mm.

For all dimensional specifications please refer to our catalogue.

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Replacement Nylon Hammer Heads

Kennedy nylon hammerheads are for use with the Kennedy Nylon Faced Hammer they are reinforced for extra strength and to prevent fracturing from off centre strikes. Each nylon hammerhead has a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead.

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Nylon Faced Safe Blow Hammer

Kennedy inside the hollow die cast aluminium hammer head are thousands of steel pellets which impact a split second after the hammer face, reducing rebound whilst also adding to the force of the blow. Each hammer has two replaceable screw-in nylon hammer faces that can be easily replaced when they become worn, without the use of any other tools - minimising down time.

The striking faces are reinforced for extra strength and to prevent fracturing from off centre strikes. The nylon hammer faces have a precision moulded screw thread that screws securely into the single piece die cast aluminium hammer head, the handle is a high strength girder section that has a shock absorbing soft dual material grip, for improved grip and control.

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Replacement Nylon Hammer Heads

Kennedy nylon hammerheads are for use with the Kennedy Nylon Faced Hammer they are reinforced for extra strength and to prevent fracturing from off centre strikes. Each nylon hammerhead has a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead.

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Nylon Faced Hammer

Kennedy Nylon faced striking hammers have no metal in the hammer faces that can mark the work piece. Each hammer has two replaceable screw-in nylon hammer faces that can be easily replaced when they become worn, without the use of any other tools - minimising down time. The striking faces are reinforced for extra strength and to prevent fracturing from off centre strikes. The nylon hammerheads have a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead, which in turn is fixed to a fully moulded polypropylene shaft with a shock absorbing soft dual material grip, for improved grip and control.
Overall length: 305mm.

For all dimensional specifications please refer to our catalogue.

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Nylon Faced Hammer

Kennedy Nylon faced striking hammers have no metal in the hammer faces that can mark the work piece. Each hammer has two replaceable screw-in nylon hammer faces that can be easily replaced when they become worn, without the use of any other tools - minimising down time. The striking faces are reinforced for extra strength and to prevent fracturing from off centre strikes. The nylon hammerheads have a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead, which in turn is fixed to a fully moulded polypropylene shaft with a shock absorbing soft dual material grip, for improved grip and control.
Overall length: 305mm.

For all dimensional specifications please refer to our catalogue.

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Replacement Nylon Hammer Heads

Kennedy nylon hammerheads are for use with the Kennedy Nylon Faced Hammer they are reinforced for extra strength and to prevent fracturing from off centre strikes. Each nylon hammerhead has a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead.

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Nylon Faced Safe Blow Hammer

Kennedy inside the hollow die cast aluminium hammer head are thousands of steel pellets which impact a split second after the hammer face, reducing rebound whilst also adding to the force of the blow. Each hammer has two replaceable screw-in nylon hammer faces that can be easily replaced when they become worn, without the use of any other tools - minimising down time.

The striking faces are reinforced for extra strength and to prevent fracturing from off centre strikes. The nylon hammer faces have a precision moulded screw thread that screws securely into the single piece die cast aluminium hammer head, the handle is a high strength girder section that has a shock absorbing soft dual material grip, for improved grip and control.

Professional Open Ended Spanners

Manufactured from chrome vanadium steel with a highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. Made to American Federal Standards, extra thick heads offer higher torque forces to be applied therefore improved performance. Conform to ASME B107.9.

Metric