Kennedy Professional Socket Set

The most most popular drive size used in the service and maintenance industries. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy professional sockets have a double knurl feature to give a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. Chamfered leading edge ensures easy fastener location. Sockets manufactured to: ANSI B107.5M: 1987, ANSI B107.1: 1978 & BS 4006 : 1992. Accessories manufactured to: ANSI B107.10M : 1982 & BS 4006 : 1992

MS50M 50 Piece Metric With Screwdriver Bits

Contents: Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 33 & 36mm. Hex Bit Sockets: 4, 5, 6, 7, 8, 10, 12, 14, 17 & 19mm. Crosspoint Sockets: No. 2, 3 & 4. Screwdriver Bits: 9 & 14mm. Spark Plug Sockets: M10 & M14. Accessories: Quick release ratchet handle, sliding T-handle, swivel handle. universal-joint 75, 125 & 250mm extension bars. Parts tray with magnetic insert.Robust fitted case with security padlock hole and cushion grip handle.

Kennedy Professional Socket Set

The most popular drive size used in the service and maintenance industries. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy Professional sockets have a knurl feature to give a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. Chamfered leading edge ensures easy fastener location. Sockets manufactured to: ANSI B107.5M : 1987, ANSI B107.1 : 1978 & BS 4006 : 1992. Accessories manufactured to: ANSI B107.10M : 1982 & BS 4006 : 1992.

M70MAW Metric, Imperial & Whitworth (70 Pieces)

Contents:

Sockets:
Metric 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 33 and 36mm.
AF 5/16", 3/8", 7/16", 1/2", 9/16", 19/32", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 11/16", 11/8", 13/16" and 11/4".
Whitworth 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4".
Hex bit adaptors: 1/4" and 5/16".
Spark plug sockets: M10 and M14.
Convertors: 1/2" square female x 3/4" square male, 1/2" square female x 3/8" square male.

Accessories:
Quick release ratchet handle, sliding T-handle, swivel handle, universal joint, 75, 125, 250, and 450mm extension bars, 125 and 250mm wobble extensions. Robust fitted case with security padlock hole and cushion grip handle.

Kennedy Professional Socket Set

The most popular drive size used in the service and maintenance industries. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy Professional sockets have a knurl feature to give a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. Chamfered leading edge ensures easy fastener location. Sockets manufactured to: ANSI B107.5M : 1987, ANSI B107.1 : 1978 & BS 4006 : 1992. Accessories manufactured to: ANSI B107.10M : 1982 & BS 4006 : 1992.

M30M 30 Piece Metric

Contents: sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 30 and 32mm. Spark plug sockets: M10 and M14. Accessories: quick release ratchet handle, sliding T-handle, universal joint, 75, 125 and 250mm extension bars. Robust fitted case with security padlock hole and cushion grip handle.

Socket Clips

Made from spring steel, bright chrome plated and used in conjunction with socket rails.

Socket Racks

Socket rails and socket clips combined together.

Professional 1" Square Drive Metric Socket Set

15 PieceThe ideal drive size for high torque hand applications. Designed to give strength and reliability under heavy loads. Used extensively in heavy plant, rail, shipyard and oil rig industries. Manufactured from hardened chrome vanadium steel, fully chrome plated with a mirror finish and aluminium free to ensure non-sparking. All have ball-retaining groove on each face of the square drive. Sockets Manufactured to ANSI B107.5M: 1987, ANSI B107.1: 1978 & BS 4006: 1992. Accessories Manufactured to: ANSI B107.10M: 1982 & BS 4006: 1992
Contents: 1" Square Drive Metric Sockets: 36, 41, 46, 50, 55, 60, 65, 70, 75, & 80mm.
Accessories: Ratchet & sliding 'T' heads, 550mm universal handle, 200 & 400mm extension bars.

Kennedy Professional Metric Socket Set

Kennedy Professional 1/2" square drive high torque sockets are manufactured from Aluminium-free chrome vanadium steel to ensure that they are strong, durable and dependable! Each socket has a unique double knurl to improve grip when taking the sockets on and off a ratchet wrench, even when covered in oil or grease! The six point single hexagon ensures that these sockets will not round off nuts and will even grip worn nuts! Corrosion resistant chrome plated with high polish mirror finish for easier cleaning. Sockets manufactured to: ANSI B107.5M: 1987, ANSI B107.1: 1978, BS 4006: 1992. Accessories manufactured to: ANSI B107.10M: 1982. BS 4006: 1992BS 4006: 1992.

M30MSH 1/2" Square Drive Metric Socket Set (30 Pieces)

The M30MSH 30 piece 1/2" square drive metric socket set from Kennedy Professional is supplied in a fitted impact-resistant plastic carry case with a cushioned handle, snap-shut clasps and padlock hasp hole.

Contents:
Metric Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 30 and 32mm.
Spark plug sockets: M10 and M14.

Accessories:
Quick release ratchet handle, universal joint, sliding T-handle, 75, 125 and 250mm extension bars.

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Nylon Faced Safe Blow Hammer

Kennedy inside the hollow die cast aluminium hammer head are thousands of steel pellets which impact a split second after the hammer face, reducing rebound whilst also adding to the force of the blow. Each hammer has two replaceable screw-in nylon hammer faces that can be easily replaced when they become worn, without the use of any other tools - minimising down time.

The striking faces are reinforced for extra strength and to prevent fracturing from off centre strikes. The nylon hammer faces have a precision moulded screw thread that screws securely into the single piece die cast aluminium hammer head, the handle is a high strength girder section that has a shock absorbing soft dual material grip, for improved grip and control.

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Replacement Nylon Hammer Heads

Kennedy nylon hammerheads are for use with the Kennedy Nylon Faced Hammer they are reinforced for extra strength and to prevent fracturing from off centre strikes. Each nylon hammerhead has a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead.

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Nylon Faced Hammer

Kennedy Nylon faced striking hammers have no metal in the hammer faces that can mark the work piece. Each hammer has two replaceable screw-in nylon hammer faces that can be easily replaced when they become worn, without the use of any other tools - minimising down time. The striking faces are reinforced for extra strength and to prevent fracturing from off centre strikes. The nylon hammerheads have a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead, which in turn is fixed to a fully moulded polypropylene shaft with a shock absorbing soft dual material grip, for improved grip and control.
Overall length: 305mm.

For all dimensional specifications please refer to our catalogue.