Slip Joint Waterpump Pliers

Industrial quality chrome vanadium steel. With a sliding pivot to give a wide range of jaw openings. Bi-material grips.

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric

Yamoto? Cold Chisels and Punch Sets

This Yamoto? cold chisel and punch set contents everything you'll need to mark metal, realign holes, driving pins in/out of machine assemblies to cutting metal brickwork or stone.

Yamoto? tools are manufactured to meet and satisfy the needs of the industrial user.

CPS014 Cold Chisel and Punch Set (14 Pieces)

The CPS014 14 piece cold chisel and punch set from Yamoto? is manufactured from drop forged chrome vanadium steel and have ground cutting edges* the set contents the following types of chisels and punches:

Pin punches ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a hexagonal body for extra grip.

Centre punches manufactured from hardened and tempered steel with a hexagonal body for positive grip. Precision ground 60 point for accurate marking of work pieces.

Cold chisels are used by the Engineering and building trades to remove waste metal when a very smooth finish is not required, cutting and chipping brickwork or stone and when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The angle of the cutting edge should be 60 to 70 degrees, inclusive, but it is dependant on the material to be cut. When cutting metal, the softer the material is, the more acute the cutting angle should be.

Taper punches used for aligning holes in jigs and fixtures etc. With a hexagonal body for extra grip.

*Where applicable.

Contents:
Pin punches: 3/16''x6'', 3/32''x4 1/4'', 1/8''x4 3/4'', 3/16''x5 1/4'' & 1/4''x5 3/4''.
Centre punches: 5/32''x5''.
Cold Chisels: 1/2''x6'', 5/8''x6 1/2'', 3/4''x7 1/2'' and 7/8'' x8''.
Taper punches: 3/16''x10'', 7/32''x10'', 5/16''x10'' and 3/8''x10''.

Yamoto Socket Sets

Yamoto sockets and accessories are manufactured from industrial quality chrome vanadium steel with corrosion resistant high polish mirror finish, aluminium-free to ensure non-sparking.

The 12 point bi-hexagonal side drive sockets allow higher torques to be applied to nuts without damage and grip worn nuts. With chamfered leading edges for easier location on the fastener. The strength and robust design of 1/2" drive make them suitable for the heavy use encountered in agriculture, service and maintenance industries.

Sockets manufactured to: ANSI B107.5M:1987.
Accessories manufactured to: ANSI B107.10M:1982.

'' Sq Drive 30 Piece Metric Socket Set

This Yamoto 30 piece ?? Square Drive Metric Socket set Contents:

Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 30 and 32mm.
Spark plug sockets: M14 and M10.
Accessories:
Quick release flick lever ratchet with rubber grip.
T-handle.
Universal-joint.
Extension Bars: 75, 125 and 250mm.
Supplied in a robust fitted case with padlock hole and cushion grip handle.

Industrial Combination Spanners

Manufactured form industrial quality chrome vanadium steel, polished and hardened jaws and bi-hexagon ring with satin finish body, corrosion resistant. The open-ended jaws are offset at 15 angle for positive torque application and easier location on the fastener. Suitable for automotive, maintenance and engineering applications. Conform to ASME B107.9M 1994

Yamoto Satin Finish Adjustable Wrenches

Yamoto? Adjustable Spanners have a slimline tapered parallel jaws for improved access into confined spaces with smooth adjustment and a self-locking jaw design to prevent unintentionally opening even when under full load.

Graduated laser etched jaws for fast repeatable jaw setting and adjustment. Manufactured from "I" beam section chrome vanadium steel for improved strength and rigidity, heat treated for extended tool life. Corrosion resistant satin finish. 22.5 offset head angle for positive torque control.

Suitable for marine engineering, automotive, aerospace, agricultural maintenance and assembly applications.

Conform to: ISO 6787-1982, ASME B.107.8M-1996, BS 6333-1995, DIN3117-1988, JIS B44604-1976.

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric Deep

Bi-Hexagon sockets - 12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Requires only a one-twelfth turn to engage the next point of the socket

Screwdriver Bits

All have ball retaining groove on each face of the square drive. For insertion/removal of fasteners and fixings using 3/8" square drive tooling. Overall length: 50mm. Bit length: 20mm. Conforms to DIN standards.

Torx

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric