3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric Deep

Bi-Hexagon sockets - 12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Requires only a one-twelfth turn to engage the next point of the socket

3/8" Square Drive Socket Set

Manufactured from industrial quality chrome vanadium steel with high polished corrosion resistant finish. The high strength ratio to weight ratio ensures the reliability and accessibility that is necessary for use in the automotive, assembly, service and maintenance industries. The bi-hexagonal design allows a higher torque to be applied and will not round off existing nuts. Sockets manufactured to: ANSI B107.5M:1987. Accessories manufactured to: ANSI B107.10M:1982.

55 Piece Metric & Imperial Standard & Deep Socket
Contents: bi-hexagon sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22mm. 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16" and 7/8" AF. Deep: 10, 11, 12, 13, 14, 15, 17, 19 and 22mm. 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" and 13/16" AF. Spark plug sockets: M10 and M14. Accessories: lever type ratchet, sliding T-handle, universal joint, 150 and 300mm extension bars, 250mm wobble extensions, 1/4" hex bit coupler. Fitted case with cushioned handle, snap shut clasp and padlock hole.

What "Practical Classics" magazine say..."Best Buy"

"Exactly how a socket set should be. Loads of standard and deep sockets, three extension drives, a UJ, swivel-headed breaker bar, an adapter for screw bits and a superbly finished tough case. The bi-hex drive sockets boast ultra thin walls, but all parts of this set seem almost indestructible."

What "Car Mechanic" magazine say..."Best Buy"
"What a gorgeous piece of kit this is. It really wouldn't look out of place in Ferrari's Formula 1 pits. And the closer you look, the better it gets. First, there are 49 sockets here, covering 6-22mm, with 10-22mm also being catered for by deep sockets. Then there's a full range of AF sizes in standard height and deep. Yamoto throw in three extensions, a UJ, a Tommy Bar, and both common sizes of spark plug sockets."

1/2" Square Drive Screwdriver Bits

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 1/2" square drive tooling. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Conforms to DIN standards. Bit length: 20mm.
Overall length: 55mm.
except * 65mm or 70mm.

Hexagon

Industrial Combination Spanners

Manufactured form industrial quality chrome vanadium steel, polished and hardened jaws and bi-hexagon ring with satin finish body, corrosion resistant. The open-ended jaws are offset at 15 angle for positive torque application and easier location on the fastener. Suitable for automotive, maintenance and engineering applications. Conform to ASME B107.9M 1994

Mechanics Screwdrivers

Featuring a classic slimline design favoured by the automotive industry. Black high impact plastic handles. Chrome finish alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. Flat blades have hexagon bolster to allow extra torque to be applied using a spanner.

Crosspoint

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric

Mechanics Screwdrivers

Featuring a classic slimline design favoured by the automotive industry. Black high impact plastic handles. Chrome finish alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. Flat blades have hexagon bolster to allow extra torque to be applied using a spanner.

Pozidriv

Yamoto Screwdrivers

The Yamoto screwdrivers in this set have extra long slotted parallel blades and the classic slimline mechanics handle favoured by the automotive industry.

Black high impact plastic handles with Chrome finish alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.

3 Piece Mechanics Slotted Screwdriver Set

Set contains three parallel Slotted Mechanics Screwdrivers:
4.00x300mm.
5.00x250mm.
5.50x425mm.

Industrial Combination Spanners

Manufactured form industrial quality chrome vanadium steel, polished and hardened jaws and bi-hexagon ring with satin finish body, corrosion resistant. The open-ended jaws are offset at 15 angle for positive torque application and easier location on the fastener. Suitable for automotive, maintenance and engineering applications. Conform to ASME B107.9M 1994

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric