1/2" Square Drive Screwdriver Bits

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 1/2" square drive tooling. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Conforms to DIN standards. Bit length: 20mm.
Overall length: 55mm.
except * 65mm or 70mm.

Hexagon

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

AF Deep

Bi-Hexagon sockets - 12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Requires only a one-twelfth turn to engage the next point of the socket

Replacement Socket Set Cases

Plastic case to suit Yamoto socket set.

Diagonal Cutting Nippers

Industrial quality chrome vanadium steel, chemically blacked. Designed to give added strength at the point and allow hard wire to be cut without damaging the edge thus giving prolonged life. Bi-material grips.

Industrial Open Ended Spanners

Made from chrome vanadium steel with polished head and 15 offset. Conforms to ASME B107.9M 1994.

Swivel Handle

The hinged link allows operation at varied angles to aid access in restricted areas.

Yamoto Satin Finish Adjustable Wrenches

Yamoto? Adjustable Spanners have a slimline tapered parallel jaws for improved access into confined spaces with smooth adjustment and a self-locking jaw design to prevent unintentionally opening even when under full load.

Graduated laser etched jaws for fast repeatable jaw setting and adjustment. Manufactured from "I" beam section chrome vanadium steel for improved strength and rigidity, heat treated for extended tool life. Corrosion resistant satin finish. 22.5 offset head angle for positive torque control.

Suitable for marine engineering, automotive, aerospace, agricultural maintenance and assembly applications.

Conform to: ISO 6787-1982, ASME B.107.8M-1996, BS 6333-1995, DIN3117-1988, JIS B44604-1976.

Yamoto Tool Chests

Double thickness side walls. One piece drawer slides. Epoxy powder coated finish. Uses 10" drawer slides and Type A lid stays.

12 Drawer Tool Chest

Top compartment size (W x D x H): 660 x 150 x 90mm.
Drawer sizes (W x D x H):
130 x 410 x 50mm (8).
280 x 410 x 100mm (1).
590 x 410 x 50mm (2).
590 x 410 x 100mm (1).

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric Deep

Bi-Hexagon sockets - 12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Requires only a one-twelfth turn to engage the next point of the socket

3/8" Square Drive Socket Set

Manufactured from industrial quality chrome vanadium steel with high polished corrosion resistant finish. The high strength ratio to weight ratio ensures the reliability and accessibility that is necessary for use in the automotive, assembly, service and maintenance industries. The bi-hexagonal design allows a higher torque to be applied and will not round off existing nuts. Sockets manufactured to: ANSI B107.5M:1987. Accessories manufactured to: ANSI B107.10M:1982.

55 Piece Metric & Imperial Standard & Deep Socket
Contents: bi-hexagon sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22mm. 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16" and 7/8" AF. Deep: 10, 11, 12, 13, 14, 15, 17, 19 and 22mm. 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" and 13/16" AF. Spark plug sockets: M10 and M14. Accessories: lever type ratchet, sliding T-handle, universal joint, 150 and 300mm extension bars, 250mm wobble extensions, 1/4" hex bit coupler. Fitted case with cushioned handle, snap shut clasp and padlock hole.

What "Practical Classics" magazine say..."Best Buy"

"Exactly how a socket set should be. Loads of standard and deep sockets, three extension drives, a UJ, swivel-headed breaker bar, an adapter for screw bits and a superbly finished tough case. The bi-hex drive sockets boast ultra thin walls, but all parts of this set seem almost indestructible."

What "Car Mechanic" magazine say..."Best Buy"
"What a gorgeous piece of kit this is. It really wouldn't look out of place in Ferrari's Formula 1 pits. And the closer you look, the better it gets. First, there are 49 sockets here, covering 6-22mm, with 10-22mm also being catered for by deep sockets. Then there's a full range of AF sizes in standard height and deep. Yamoto throw in three extensions, a UJ, a Tommy Bar, and both common sizes of spark plug sockets."