Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Metric

Sheet Metal Nibbler - Heavy Duty

With vinyl grips with anti slip guards, hardened steel blade. Cutting Capacities: Sheet metal up to 1.2mm (18 gauge). Plastic up to 2mm (14 gauge).



Suitable for cutting a wide range of sheet materials without bending or distorting, sheet metal up to 1.2mm (18 gauge) and plastic up to 2mm (14 gauge). The handles are coated and have anti-slip guards for extra safety. The positive spring loaded cutting action enables the cutter to be used single handed for improved accuracy, comfort and control. Replaceable molybdenum front nibbler jaws have accurately ground edges for cleaner cutting. Side jaws for wire cutting. Safety jaw lock. Overall length 250mm.

1/4" Hexagon Titanium Coated Screwdriver Bits

Kennedy quality titanium screwdriver bits that provide an improved wear resistance to protect gripping points from the rigors of repetitive use. For use with hand and power tools.

Circlip Pliers

German pattern. Drop forged, chrome vanadium steel. PVC grip handles.

Internal

Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Inch

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Square

Yamoto Tool Chests

Double thickness side walls. One piece drawer slides. Epoxy powder coated finish. Uses 10" drawer slides and Type A lid stays.

12 Drawer Tool Chest

Top compartment size (W x D x H): 660 x 150 x 90mm.
Drawer sizes (W x D x H):
130 x 410 x 50mm (8).
280 x 410 x 100mm (1).
590 x 410 x 50mm (2).
590 x 410 x 100mm (1).

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

A/F

Neodymium Pot Magnets

Neodymium magnet in a cylindrical brass pot. Assembled with steel pole pieces to give a multi-pole effect which offers superior grip at the contact face ideal for clamping or lifting application. Ideally work at temperatures upto 80°C, but have a maximum working temperature of 100°C

Shallow