1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

A/F

1? Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Rutland™ Bypass Secateurs

Bypass secateurs with a non-clogging telescopic spring and single-handed locking mechanism.

8.1/2" Heavy Duty Secateurs

Textured rubber grip handles. Overall length: 215mm. Maximum cutting diameter: 25mm.

Hand Stamps

Manufactured from Sheffield tool steel nickel plated. With chamfered edges to prevent damaging the surface of the workpiece. For making a clear permanent mark legible even after subsequent painting or plating. Positive Indent (Standard)

Figure Sets 0 - 9

Body Repair Kit

Used for clamping, pulling, bending, straightening, spreading and lifting operations. Snaps together quickly. Heavy duty hand pump has automatic overload feature. Tough, blow moulded case.
Strong flexible hose with spring guards at both ends.
Hydraulic hand pump, ram and spreader.

Spares

Spreader Ram
1/2 ton capacity.
1/4" NPT thread size.

Lever Type Cable Cutter

These cable cutters have heat treated cutting edges and are designed to cut copper/aluminium cables with minimal distortion. The soft grip handles are designed for user comfort whilst exerting force.

Pencil Brush

Wooden handle with steel ferrule.

Electricians VDE Square Section Handle Screwdrivers

Volt-tested to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC. Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.

Kennedy® Standard Industrial Terminals - Blue Female Socket

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Industrial Paint Brushes

Plastic handles. Chrome plated lapped and pressed ferrules. Pure bristles vulcanised in rubber. Designed to give excellent results at an affordable price. For DIY and trade use.

Kennedy Service Engineers' Tool Kit

Suitable for use by the service engineer, the electrician and tradesman. All the Kennedy industrial quality tools carry a quality guarantee.

102 Piece Service Engineer's Tool Kit

Contents:
Hi-impact mobile tool case.
6 piece 16cm cut 2 needle file set.
150mm chrome finish adjustable wrench.
150mm mains tester range 125/250V.
Insulation tape.
Soldering iron 25W 240V.
Cable stripping knife.
Desoldering gun.
17gm 1.0mm dia 60/40 cored solder.
Square head centre punch 3.2 x 100mm.
150mm/6" flexible rustless rule.
Precision tweezers: 115mm sharp nose, 120mm flat blade.
Eye loupe.
30mm dia. telescopic inspection mirror (handle expands to 480mm).
225g (1/2lb) ball pein hammer.
7.5m/25ft steel tape.
13 segment blade mini autolock retractable knife.
Junior hacksaw frame c/w hardened blade.
10 junior hacksaw blades for metal.
215mm plastic handle scissors.
Magnetic pick up tool.
160mm snipe nose plier.
160mm diagonal cutting nipper.
160mm combination plier with side cutter.
150mm insulation and wire stripping plier.
115mm precision flat nose pliers.
115mm precision long nose pliers.
115mm precision nippers.
115mm precision end cutting nippers.
Pro-torq grip screwdrivers with chrome vanadium blade: Slotted 100 x 6mm.
Crosspoint 76mm x No.0 and No.1, 6mm x No.2.
Supadriv 76mm x No.0 and 1, 100mm x No.2.
Electricians: Parallel 150 and 200 x 5mm.
Offset screwdrivers: 5mm x No.1, 6mm x No. 2.
1000v VDU insulated screwdrivers: parallel 4 x 100mm slotted 5.5 x 125mm.
Torx screwdrivers: T6, T8 and T10. 11 piece screwdriver and tool set: Parallel 1, 1.2, 1.4, 1.8, 2.4 and 3mm, Crosspoint PHO-2, PHO and PH1, fine point awl and tweezers.
7 piece electronic screwdriver set: Parallel 1.4, 2, 2.4 and 3mm, Crosspoint PHO-3, PHO-2 and PH0.
6 piece chrome vanadium steel 0-11 BA open ended spanner set. 20mm diameter sash tool.
9 piece hex key set 1.5-10mm.
Chrome vanadium combination spanners: 5.5, 6, 7, 8, 9 and 10mm.