1/4" Hexagon Titanium Coated Screwdriver Bits

Kennedy quality titanium screwdriver bits that provide an improved wear resistance to protect gripping points from the rigors of repetitive use. For use with hand and power tools.

Snap-off Knife Blades

Kennedy Industrial quality knife blades have a superior edge hardening for longer tool life and sharper edge. Best value with longer working between blade changes and with easy, safe segment-snap to renew leading edge.
18 x 100mm 8 segment. 9 x 55mm 8 segment. 9 x 91mm 13 segments.

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Metric

Double-Ended Feeler Gauge

Industrial quality with hardened and polished blades which fold into a steel case. Each blade is etched with its size for ease of use. 18 blades cover metric and imperial sizes. Manufactured to BS957:1941 Part 1 (Imperial) & BS957: 2008 Part 1 (Metric). 18 Blade: Metric Range: 0.05, 0.1, 0.15, 0.2, 0.25, 0.3, 0.4 & 0.5mm. Inch Range: .0015", .002", .003", .004", .006", .008", .010", .012", .015" & .025".

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.



To suit Kennedy hexagon key set (KEN-601-1060K). N.B. Case only, contents not included.

Bevel Edge Wood Chisels

Designed to give a life time of high performance. Chrome vanadium alloy blades, hardened, tempered, ground and polished. 'C.A.B.' (cellulose acetate butyrate handles).

Craftsman

Hammer-blow resistant handles. For craftsmen and joiners.

Kennedy Club Hammers

Kennedy Club or lump hammers have fully forged and heat-treated hammer heads with flat striking faces and chamfered edges.

They are suitable for use with cold chisels, brick bolsters, star drills and masonry nails in confined work areas with little room for a full arc swing, the wide face makes it ideal for striking chisels and punches.

Available in a range of weights with hickory or fibreglass shafts.

Hickory Shaft

With fine grain, forged steel head, hardened and tempered with polished faces.

Combination Spanners

Manufactured from drop forged steel with 15° cranked heads. Conforms to ASME B107.6.

200mm (8") Brass Back Dovetail Saw

Alloy steel blade, tensioned with hardened and ground teeth. Heavy rigid brass back and polished rosewood handle. Securely fastened with two brass screws. 20tpi.

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Combination Spanner