Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Metric

Cylinder Hone Stones

Replacement cylinder honing stones 29 x 4.5mm, to suit Kennedy cylinder hones KEN5032940K and set KEN5032930K. Also compatible with most other leading brands. Pack of 3.
Packaging dimensions: (W x H x D): 89 x 100 x 20mm
Gross weight: 22g

Kennedy Professional Cantilever Toolbox

Manufactured from heavy gauge steel with all welded construction for continuous industrial use. Durable corrosion resistant two part epoxy powder coat finish. Fully enclosed cantilever mechanism for added security. Quick release lid clasps with padlock hole for security. 2 Piece cantilever lids that can be padlocked for additional security (padlock not included). Full width piano hinges provide rigidity and strength. Large base compartment (450 x 260 x 170mm) with 4 cantilever trays for additional storage. The cantilever action of the top trays makes tray contents instantly available. Supplied with fixed carry handle on the lid.

18" Professional Cantilever Toolbox

Overall dimensions (L x W x H): 333 x 459 x 255mm.

Kennedy® Paint and Plaster Mixer

Used for mixing plaster, concrete, filler, epoxy resin, emulsion paint and wallpaper paste. The stirring end should be fully immersed before use.



Heavy-duty shaft 12mm hexagon. Overall length 600mm.

Impact Extractor Sockets

Extracts rounded, seized or painted right hand threaded fasteners, the reverse spiral flutes are designed to bite into seized nuts and bolts providing greater grip for extraction. The socket bar is to drive out the fasteners from sockets, once removed.

3/8" Square Drive Impact Extractor Sockets

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Non-Sparking Screwdriver (Parallel)

Service Cases

Manufactured from co-polymer plastic. Resistant to denting, scratching. Virtually unbreakable. Suitable for transporting and storing smaller items, with opaque lids that allow the contents to be seen at a glance. The lids have three hinges for increased strength and durability, sliding catches securely hold the lid closed. Available with either fixed compartments or without, so that you can select divider inserts to meet your requirements. All cases are fitted with feet to allow them to be stored in the vertical position.

21oz Smooth Face Hammer

Smooth face hammer with 14` fibreglass handle. Hammer design assures integral and sweeping overstrike protection whilst placing the power and weight at the front, maximising power and reducing user effort.
Head size: 21oz.
Type: claw.
Length: 350mm: (14`).

1/4" AF Hexagon 'Direct Drive' Screwdriver Bits

1/4" Hex with ball recess.

Crosspoint

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

1/2" Square Drive Socket

12 point bi-hexagon.