Speed Brace

Manufactured from high quality chrome vanadium, fully polished finish. Ideal for nut spinning.

American Pattern 3/8'' square drive speed brace

3/8'' square drive speed brace with freely revolving handle for fast nut spinning. Made from chrome vanadium steel.
Overall length: 470mm.

Kennedy Club Hammers

Kennedy Club or lump hammers have fully forged and heat-treated hammer heads with flat striking faces and chamfered edges.

They are suitable for use with cold chisels, brick bolsters, star drills and masonry nails in confined work areas with little room for a full arc swing, the wide face makes it ideal for striking chisels and punches.

Available in a range of weights with hickory or fibreglass shafts.

Hickory Shaft BS 876

Tested to the requirements of BS 876: 1981 (head stamped BS 876).

'Hi-Grip' Screwdrivers

Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.

Flared

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Six Wheel Glass & Tile Cutter

Six wheel cutting head with tungsten carbide cutting wheels.

5/16" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Crosspoint

Senator® Plate Welding Plier - W Type

Deep throated, suitable for clamping sheet metal, body panels and sills, with split jaws to allow maximum visibility and access to the working area when welding. Quick release lever.

T-Handle Clamps

Manufactured from high strength ribbed girder section heat treated carbon steel for improved strength and rigidity when placed under working loads, with nickel and chrome plated corrosion resistant finish the drive screw and T-bar are chemically blacked. Sliding T-handle for easy clamping. The swivel ball joint clamp foot ensures the clamping forces are applied evenly.

Professional Combination Spanners

Manufactured from chrome vanadium steel with highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spanner, for easier cleaning and preventing corrosion. Long reach, wall drive. Conform with ANSI B107.9M.

Metric

1/4" AF Hexagon 'Direct Drive' Bit Adaptors

1/4" hexagon shank with ball recess. For use with insert bits.

Magnetic with Retainer

Valve and Piston Ring Compressors

Designed for use on production lines as well as in the automotive workshop. Able to cope with occasional commercial use. Manufactured from bright nickel plated steel with PVC cushion grips.