1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

BSW

1? Drive BSW Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Kennedy® Standard Industrial Terminals - Blue Ring

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Flat Bits

Forged from high quality tool steel with chip clearance groove and hollow ground point. Centerless ground and true running. Ground spade bit head. For cutting holes in laminates and wood. 6mm hexagon shank to prevent slipping at speed.

Long Tape Measures

Non-reflective steel tape. Nylon coated for maximum durability. High impact ABS plastic case. Flush winding handle. Chrome plated end hook. Tension 20N. Belt clip. Metric and inch measurement. Blade width is 10mm. Manufactured within the tolerance of EEC class II.

Steel Blade

Kennedy® 600mm Pick Up Tool

4 prong steel retractable claw. Flexible steel stem with a spring loaded plunger to open and close jaws. Chrome plated and corrosion resistant. Ideal for recovery of small objects.

Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Flat Chisel

Used by the engineering and building trades for cutting and chipping cold metals, brick work and stone. The angle of the cut edge should be 60 - 70, inclusive, but is dependant on the material to be cut. When cutting metal, the softer the material is, the more acute the cutting angle should be.

Kennedy AET200 Apprentice Engineers Tool Kit

Supplied in a 3 drawer professional roller cabinet and a 3 drawer top chest. Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed.

3 Drawer Top Chest:
Top compartment size 89 x 661 x 150mm, drawer sizes 51 x 591 x 282mm (x1), 102 x 591 x 282mm (x2).
3 Drawer Roller Cabinet:
Bottom compartment size 610 x 432 x 356mm, drawer size 591 x 410 x 102mm (x3).

AET200 Apprentice Engineers Tool Kit (208 Pieces)

Contents:
25 piece HSS drill set 1-13.00mm x 0.5mm.
6 piece 200mm double cut engineers' file set.
6 piece 16cm cut 2 assorted needle file set.
25x 230 x 280mm assorted emery sheet.
200mm chrome vanadium steel adjustable spanner.
6 x 150mm flat cold chisel.
19mm x 33m black PVC insulation tape.
76mm 18 blade combination feeler gauge set.
4.8mm square head centre punch.
150mm/6" stainless steel rule c/w pocket clip.
178mm double ended engineers' scriber.
Eye loupe.
Adjustable telscopic 30mm dia inspection mirror (expands to 180mm).
6 piece parallel pin punch set: 2.4, 3.2, 4.0, 4.8, 5.5 and 6.4mm.
150mm (6") engineers' square - BS939 grade B.
Tap wrenches 1.5-6.4mm and 6.4-19mm.
Magnetic telescopic pick-up tool extends to 550mm.
29 piece engineers' bit set: all 6mm hex x 25mm overall length, complete with magnetic spinner handle, 6mm hexagon bit adaptor and 6mm square socket adaptor. Hexagon: 2, 3, 4, 5, 6, 7 and 8mm. Flat: 3, 4, 5, 5.5, 6.5 and 8mm, 3/32", 1/8", 5/32", 3/16", 1/4", 7/32" and 5/16". Crosspoint: No.1, 2 and 3. Pozidriv: No.1, 2 and 3.
450g(1lb) ball pein hammer wood shaft.
7.5m/25ft steel tape.
Snap-off 8 segment blade economy knife.
Retractable trimming knife with 5 blades.
Junior hacksaw frame.
300mm lightweight professional hacksaw frame.
6 off 12" x 1/2" x 18t HSS hacksaw blades.
20 junior hacksaw blades.
2 plastic handle household scissors.
150mm snipe nose plier with side cutter.
150mm diagonal cutting nipper.
150mm engineers' combination pliers with side cutter.
250mm curved jaw high strength grip wrench.
8 piece Pro-Torq screwdriver set: Crosspoint No.1 x 75, No.2 x 100, Pozidriv No.2 x 100, Flared 6.3 stubby, 6.3 x 100, 8.0 x 200, Parallel 5.0 x 75, 5.0 x 150.
14 piece combination spanner set 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
25 piece metric socket set 1/2" square drive sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24, 27, 30 and 32mm.
Spark plug sockets: M10 and M14.
Accessories: quick release ratchet handle, sliding T-handle, universal joint, 75, 125 and 250mm extension bars.
9 piece metric hex key set 1.5-10mm.

Kennedy Inspection Lamp with Li-ion Battery

Ideal for use in engine bays and other low light work areas. Main light and spotlight option. Main light lasts up to 2 hours when fully charged. Convenient grip mounted ON/OFF switch. Durable and robust construction. High light output. Sturdy swivel hanging hook. Anti-roll hexagonal shape. Rubber handle and end cup. Supplied with mains charger.

ILR365 - 65 LED Inspection Lamp (Rechargeable Li-ion Battery)

Model number: ILR365
Order code: KEN-503-5080K
LED intensity at 50cm (main light): 1,600Lux
LED intensity at 50cm (spotlight): 200Lux
Charging time: 5hrs
Operating time (main light): 2hrs
Operating time (spotlight): 20hrs
Charger input: 230V ~ 50Hz
Charger output: 5.4V DC 600mAh
Operating voltage: 3.7V
Operating temperature: 0C to 40C
Battery: Li-ion 2,000mAh
Moisture protection (Inspection Lamp only): IP20
Net weight (Inspection Lamp only): 410g

Kennedy Fuel Container

Suitable for transporting and storing petrol, diesel and motor oil. With lever type safety sealing cap and integral carrying handle. Painted inside and out.

10 Litre Heavy Duty Steel Jerry Can (Green)

The 10ltr capacity Jerry Can from Kennedy is manufactured from 16swg steel with fuel resistant lining. A unique wide channel breather helps ensure that when you pour fuel out of the Kennedy Jerry Can it pours as smoothly as possible to reduce spillages. The leak-proof bayonet lid closure allows storage of the can in any position and is additionally secured in position with a locking pin to prevent accidental opening.

UN Approved Class 3. Conform to DIN 7274. GS TUV approved.

Flexible pouring spout available seperately (KEN-503-9300K).

Individual Nickel Plated Carbon Steel Founts

Precision manufactured carbon steel stamps with nickel-plated finish. For producing clean impressions in one impact. 3mm character height.