Compression tester

Suitable for all types of spark plugs. Finds faults in piston rings, valves, head gaskets and cylinder bores. Suitable for use on most petrol engine vehicles and motorcycles. Can be used on crankshaft seals in two-stroke engines. 195mm flexible hose. For use on 14mm and 18mm threads. Large easy to read scale 0-21bar/0-300psi. Air release valve to allow rapid re-testing.

Heavy Duty Liquid Measures

Chemical and oil resistant polyethylene liquid measures. Integral dispensing spout resistant to extreme weather conditions. Can be used in conjunction with dispensing spouts listed below.



Graduations: 1/2ltr - 1/4 & 1/2ltr, 1ltr - 1/4, 1/2, 3/4ltr, 2ltr - 1/2, 1, 1 1/2 & 2ltr, 3ltr - 1, 1 1/2, 2, 2 1/2 & 3ltr, 5ltr - 1, 2, 3, 4 & 5ltr

Heavy Duty G-Clamps - Copper Plated Screw

All sizes feature good throat clearance, a copper-plated screw, reinforced shoulders for greater strength, a swivel clamp head and a sliding tommy bar for tightening. Manufactured from drop forged ribbed anti-twist frame steel, ideally suited to fabrication and welding applications. Finished in a heavy epoxy coating for long-term rust and weld spatter resistance.

Plastic Handled Scissors

Stainless steel blades. All supplied with protective PVC wallets.

Household Scissors

Suitable for general cutting applications around the house. Hardened and ground steel blades with asymmetrical plastic handles.

Impact Extractor Sockets

Extracts rounded, seized or painted right hand threaded fasteners, the reverse spiral flutes are designed to bite into seized nuts and bolts providing greater grip for extraction. The socket bar is to drive out the fasteners from sockets, once removed.

3/8" Square Drive Impact Extractor Sockets

Kennedy Heavy-Duty G-Clamps

The Kennedy Quality Industrial Tooling G-clamps have drop forged steel bodies with anti-twist ribbed reinforcement and a precision machined drive screw with swivel shoe for positive location on the material being clamped.

Paint Tray

The rigid drain off area helps remove the excess paint from the roller preventing drips and evenly coating your paint roller.
L x W x D: 400 x 290 x 60mm.

Engineers' & Electricians' Screwdrivers

Kennedy Engineers' & Electricians' Screwdrivers have a traditional fluted design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.

Flared - Square Blade

Square bladed screwdrivers can be gripped in a spanner or locking wrench to allow greater torque to be applied from the side rather than from directly above the screwdriver.

Cross Pein Hammers

Traditionally used by joiners and fitters. Cross pein can be used for setting pins and nails prior to "driving home" with the flat faced pein.

Warrington Hardwood Shaft

Close grained hardwood shaft shaped to comfortably fit in the hand. Forged steel head with ground and polished striking face.

Kennedy® Parallel Pin Punch Sets

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.

150mm (6") Overall Length

Supplied in plastic wallet.