1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

SIT

Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy® Toolmakers' Clamps

Extremely useful for holding work together when drilling, tapping or doing other machining operations. Manufactured from case hardened and tempered steel for added strength. Equipped with a spring tension clip and a retaining ring to hold the loose jaw in place when the clamp is being adjusted.

Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

A/F

32mm Offset Chrome Vanadium Combination Spanner

Chrome vanadium steel. 15&186; cranked open end. Offset ring end. Conforms to DIN 3113B.

Torx Key Set

Tamper-proof torx keys are the same shape as a standard torx keys, but have a security hole in the middle. Manufactured from chrome molybdenum steel. Torx is a registered trademark of Camcar/Textron.

9 Piece Tamper Proof L-Wrench Torx Key Set

9 Piece Set Contents: T8, T9, T10, T15, T20, T25, T27, T30 and T40.

Kennedy® Shallow Pot Magnets

North polarity in centre separated from opposing pole by a continuous slot. For use in areas of restricted height. Supplied with plain bore fixing hole and keeper. Permanently magnetic. Can be used in temperatures up to 550C.

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Crosspoint

Medium & High Tensile Cutters

Compound action magnifies the pressure applied to the handle. Ensures a concentration of force between the jaws.

Centre Cut

Manufactured from drop forged hardened chrome vanadium steel. Ideal for cutting both flat and round section steels. Hardened carbon steel clipper cut jaws on 12", 18" and 24". High tensile 24" also available with end cut pattern. The 30", 36" and 42" come with centre cut pattern jaws. Tubular steel handles with cushion grip for maximum operator comfort. Conform to DIN 2076.

10mm Offset Chrome Vanadium Combination Spanner

Chrome vanadium steel. 15 cranked open end. Offset ring end. Conforms to DIN 3113B.