Kennedy Multi Bender Pipe Tool

Precision bending up to 180 on copper and thin wall steel tubing. Bends tube without distortion. Formers and guides will accept 12, 15 & 22mm O/D tube. For use in the plumbing, heating, refrigeration and air conditioning industries.

Kennedy Multibender Pipe Tool

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 8 sizes ranging from 8" - 48".

Heavy-Duty

Kennedy Plastic Pipe Cutter Mini Hose Type

Manufactured from tough hard wearing ABS plastic. Spring loaded with a heat-treated steel blade.

Kennedy Multibender Pipe Tool

Precision bending up to 180 on copper and thin wall steel tubing. Bends tube without distortion. Formers and guides will accept 12, 15 & 22mm O/D tube. For use in the plumbing, heating, refrigeration and air conditioning industries.

Hinged Pipe Vice

Hinged pipe vice, used for repetitive tasks on pipework. The frame of the pipe vice is made from cast iron with jaws made from hardened tool grade alloy steel with a corrosion resistant coating. The top jaw of the pipe vice is held in position with a hook which automatically engages when the vice is closed. Can be fitted to bench or stand.

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 25ft

Mini Pipe Cutter

Compact and robust construction ideal for use in confined spaces. Grooved rollers allow close-to-flare cuts. Large feed screw for accurate cutting of aluminium, brass, copper and steel tubing. Length 66mm.

Pipe Cutters & Wheels

Single cut wheel with two (3 - 30mm) and four (5 - 64mm) rollers. Suitable for stainless steel, brass and copper tubes. With deburring blade.
*5550K has quick release mechanism.

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"