Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 25ft

Kennedy Pressure Testing Pump Spares

A light, portable and compact 60 bar pressure testing pump. Tests pressurised plumbing and central heating systems with the system full of water. (Not suitable for gas pipe testing because water must be used.) Robust powder-coated steel construction, With easy-fill 10ltr reservoir, 1.5m 1/2" reinforced hose and a pressure gauge graduated in bar and psi.

Standard Spares;
Gauge 60bar: Order Code KEN-567-9000K
Hose 60bar: Order Code KEN-567-9020K
Seal Kit: Order Code KEN-567-9040K

Swedish Pattern Pipe Wrenches

Narrow design for confined areas, used for gripping pipe and nuts. Forged chrome vanadium heat treated steel. Knurled adjusting nut with guiding reinforcement on handle. Conform to DIN 5234.

"S" Type

"S" shaped jaws grip at three points to ensure a maximum grip.

Feeler Gauges

Quality industrial with hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.

Metric: Manufactured to BS957: 2008 Part 1 Metric.

13 Blade: .05, .1, .15, .2, .25, .3, .4, .5, .6, .7, .8, .9 & 1mm.

Spare Jaw & Nut

To suit Kennedy Standard Duty Pipe Wrenches

Spares and Accessories

To suit the Kennedy Drop Head Threader (KEN-588-8800K).

Stand & Tool Tray

Stand is of robust construction and is suitable for workshop and site use. Essential for use whilst cutting, bending and threading pipework. The stand is fitted with an integral tray for holding tools and fittings, wide angled legs give greater stability and the folding design provides easy storage and transportation. Fitted with anti-skid duck board for operator safety.

Spare Jaw & Nut

To suit Kennedy Standard Duty Pipe Wrenches

Kennedy Automotive Chain Pipe Cutter

Cuts thin wall pipe (stainless steel, copper, PVC etc.) up to 2.6mm thickness. The grip action eliminates hand gripping effort to ensure perfect tracking. Can be used for efficient cutting of exhaust pipes.