Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 8 sizes ranging from 8" - 48".

Heavy-Duty

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

12.7mm x 7.6m

Spare Blades for Kennedy Plastic Pipe Cutters

Capacity: 12-42mm. To suit Kennedy Plastic Pipe Cutter (KEN-588-5842K)

Kennedy Drain Rods

The rubber plunger for Kennedy drain rods builds up pressure in the water to force obstruction clear. One piece rubber.

Available with two different type of joints:

Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction.

Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions.

6?? Rubber Plunger Universal Type

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 8 sizes ranging from 8" - 48".

Heavy-Duty

Pipe Cutters & Wheels

Single cut wheel with two (3 - 30mm) and four (5 - 64mm) rollers. Suitable for stainless steel, brass and copper tubes. With deburring blade.
*5550K has quick release mechanism.

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 7 sizes ranging from 8" - 36".

Standard Duty

Drain Test Bung

Used to pressure test or temporarily seal the end of an open pipe which is newly laid or decomissioned, preventing the ingress of water, gasses, rodents.