Kennedy 6-36mm Plastic Pipe Cutter

Stainless steel blade. Diecast alloy body. Extra wide lower jaws for easy production of 90 cuts. Guillotine action ensures a clean cut every time. 4-stage ratchet. Handle retaining loop for compact storage and blade safety. Replaceable blade. Not suitable for cutting metal.

Kennedy Pressure Testing Pump Spares

A light, portable and compact 60 bar pressure testing pump. Tests pressurised plumbing and central heating systems with the system full of water. (Not suitable for gas pipe testing because water must be used.) Robust powder-coated steel construction, With easy-fill 10ltr reservoir, 1.5m 1/2" reinforced hose and a pressure gauge graduated in bar and psi.

Standard Spares;
Gauge 60bar: Order Code KEN-567-9000K
Hose 60bar: Order Code KEN-567-9020K
Seal Kit: Order Code KEN-567-9040K

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 7 sizes ranging from 8" - 36".

Standard Duty

Feeler Gauges

Quality industrial with hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.

Inch: Manufactured to BS 957: 2008 Part 1 Imperial.

26 Blade: .0015", .002", .0025", .003", .004", .005", .006", .007", .008", .009", .010", .011", .012", .013", .014", .015", .016", .017", .018", .019", .020", .021", .022", .023", .024" & .025".

Adjustable Pipe Wrench

A general purpose pipe wrench with milled and hardened teeth which grips the workpiece tighter the more pressure is applied. Pressed steel handle with high carbon steel profiled jaws and knurled thumb-adjusting nut that easily adjusts with one hand.



Overall length: 180m (7")

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

Kennedy Drain Rods

The Kennedy drop scraper when used with Kennedy drain rods glides over small obstructions and drops into a vertical position to allow material to be dragged back.

Available with two different type of joints:

Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction.

Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions.

4?? Drop Scraper Universal Type

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 25ft

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 25ft

Kennedy Pressure Testing Pump

A light, portable and compact 60 bar pressure testing pump. Tests pressurised plumbing and central heating systems with the system full of water. (Not suitable for gas pipe testing because water must be used.) Robust powder-coated steel construction, With easy-fill 10ltr reservoir, 1.5m 1/2" reinforced hose and a pressure gauge graduated in bar and psi.

Standard Spares;
Gauge 60bar: Order Code KEN-567-9000K
Hose 60bar: Order Code KEN-567-9020K
Seal Kit: Order Code KEN-567-9040K