Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm

Pipe Vice & Stand

Hinged pipe vice, used for repetitive tasks on pipework. The frame of the pipe vice is made from cast iron with jaws made from hardened tool grade alloy steel with a corrosion resistant coating. The top jaw of the pipe vice is held in position with a hook which automatically engages when the vice is closed. Can be fitted to bench or stand.



Stand is of robust construction and is suitable for workshop and site use. Essential for use whilst cutting, bending and threading pipework. The stand is fitted with an integral tray for holding tools and fittings, wide angled legs give greater stability and the folding design provides easy storage and transportation. Fitted with anti-skid duck board for operator safety.

Heavy Duty Roller Stand

Ideal for supporting long and heavy duty pipe and timber. Adjustable feet. Cast Iron base. Lock-knob to securely lock-in height settings. Cast iron base with levelling pads for stability.

Adjustable Twin Roller Stand

Conventional roller stand and pipe stand performance in one unit. Choose two operational modes, for flat workpiece and pipe or timber, quick conversion device for accomodating different operations. Adjustable height 30-1/8" (765mm)to 48-3/4" (1240mm)1 3/8" (35mm)diameter x 6" (150mm) width with spring-loaded axle.Adjustable roller stands with double rollers forming veegroove for added stability allowing easy rotation and feed of up to 7" (180mm)diameter pipe or timber.

Spare Jaw & Nut

To suit Kennedy Heavy Duty Pipe Wrenches

Kennedy 25-63mm Plastic Pipe Cutter

Stainless steel blade. Diecast alloy body. Extra wide lower jaws for easy production of 90 cuts. Guillotine action ensures a clean cut every time. 5-stage ratchet. Handle retaining loop for compact storage and blade safety. Replaceable blade. Not suitable for cutting metal.

Kennedy Brass Radiator Key

Square opening brass key for use on domestic radiator bleed screws with easy to turn clock key type handle for releasing air from water filled radiators.

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 7 sizes ranging from 8" - 36".

Standard Duty

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 20ft

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 8 sizes ranging from 8" - 48".

Heavy-Duty

Kennedy Drain Rods

Kennedy drain rods are the essential tool to have to easily and rapidly unblock drains, pipes or sewers. They are manufactured to exacting industry quality standards using polypropylene rod tubing that is fitted with solid brass threaded joints securely fixed in place with brass rivets. These Kennedy drain rods are strong, durable and are slightly flexible to ensure the rods have the right amount of flex to make it easier to feed them into the drain through the inspection hatch and to follow the bends in any drain, pipe or sewer. A full range of plunger, worm screw and drop scraper attachments are available.

Available as two different types of rod connecting joints:

Universal screwed thread connectors for rapid assembly and disassembly.
Lockfast retaining nut joints are secured with a spanner.

For the full range of Kennedy Plumbing tools please refer to our catalogue.

Heavy Duty 'Lockfast' Flexible Drain Rods Set

The Kennedy heavy duty drain rods have a lockfast retaining nut that must be tightened or loosened with a spanner, rods fitted with this type of joint can be rotated in either direction in use and will remain securely fastened in even the most demanding of conditions.

Set Contents;
10 x 20mm x 900mm LRN joint rods
1 x 100mm double worm screw
1 x 100mm Plunger
1 x 100mm Drop scraper
Also supplied with 2 rod ties.