Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Yankee Screwdriver Bits

Manufactured from high quality chrome vanadium steel. To suit Yankee spiral ratchet screwdrivers.

Light Duty

To suit Kennedy 300mm Yankee and Stanley 135B Yankee, Handyman 133B Yankee and Handyman 233B Yankee.

1/4" Hexagon Titanium Coated Screwdriver Bits

Kennedy quality titanium screwdriver bits that provide an improved wear resistance to protect gripping points from the rigors of repetitive use. For use with hand and power tools.

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B337
Maximum load: 3 Metric Tonnes.
Height range: 194 to 372mm Min/Max.
Max saddle adjustment: 60mm.
Weight: 3.75kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Adjustable Pipe Wrench

A general purpose pipe wrench with milled and hardened teeth which grips the workpiece tighter the more pressure is applied. Pressed steel handle with high carbon steel profiled jaws and knurled thumb-adjusting nut that easily adjusts with one hand.



Overall length: 230m (9")

All Purpose Drip Tray

For protecting floor surfaces and coverings to prevent any unsightly stains or puddles that would make the storage area floor dirty or slippery. Suitable for catching those small parts during maintenance. If placed under the catch tank while changing oils, any spillage is contained and during ratio changes it is ideal for catching bearings, springs etc preventing contamination. The tray is made of moulded plastic with integral carry handles. Internal dimensions: 330 x 520mm.

Tar Brush

For use with tar, creosote, whitewash etc. All with 80mm (3 1/8") heads.

Long Handle - Bolt on type.

Length 1200mm (47").

Silver Solder Bars

55% silver, 21% copper, 22% zinc and 2% tin. Melting range 630 - 660C. General purpose solder.
Complies to BS1845/AG2. Diameter: 1/16" Average length: 600mm.

Spare Tips

To suit the T-Handle Circlip Tool