Standard Sockets

Chrome vanadium. Bi-hexagon. (12 point). This range of 1" (25mm) series sockets is the ultimate for high torque hand applications. The single hexagon design gives strength and reliability under heavy loads. Used extensively in heavy plant, rail, shipyard and oil rig industries. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. Chamfered leading edge ensures easy fastener location. Used for tightening and untightening nuts where the threaded stem of the mating fastener prevents access with standard length sockets.

Metric

Screwdriver Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 3/8"square drive tooling. Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Overall length: 50mm. Bit length: 20mm. Conforms to DIN standards.

Hexagon

Thorace Dead Blow Hammers

Hollow die cast head partially filled with steel shot, which adds to the weight of the impact and prevents rebound, delivering a dead blow. The handle is manufactured from aluminium alloy with a shock absorbent non slip rubber grip. Supplied with two screw in replaceable white nylon faces.

Professional Ratchet, Combination Spanners

Made from chrome vanadium steel with mirror polish finish. Mirror finish prevents oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5 movement to operate ratchet. Thin wall design for greater access. Conform to DIN 838 and ANSI 8107.6.

Metric

Kennedy® Replacement Jaws

Replacement jaws for KEN 515-5200K crimping tool.

Shaver Tool

With tough enamelled alloy bodies and high carbon heat treated steel blades.



With plastic holder.
Blade length: 63mm.
Blade width: 40mm.
Overall length: 185mm.

Irwin Blue Groove Auger - 6 Piece

Blue Groove
Tri-flute design for faster chip ejection. Full screw tip for ease of use and pull through. Cutting spurs clean holes with minimal 'break out'. Less binding and ease of use with tapered flute. Full length heat treatment for extra durability. Sizes: 16 - 32mm.

Industrial Open Ended Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with a 15 offset. Conform to DIN 3110 & BS 192 : 1982.

Metric

1/2" Square Drive Screwdriver Bits

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 1/2"square drive tooling. Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily. Registered Design No. 2053516UK. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Overall length: 55mm. Bit length: 17mm. Conforms to DIN standards.

Hexagon

Kennedy Double Ended Ring Spanner Sets

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

Metric (11 Pieces)

Contents:
6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27 and 30 x 32mm.