Senator® 24"/600mm Hi-Visibility Girder Section Spirit Level

Manufactured from impact resistant ABS plastic. Three vials horizontal, vertical and 45°. Metric and inch graduated face. Accuracy: 1mm/1000mm.

Magnetic Trays

Heavy duty tool/parts tray with durable hardwearing corrosion resistant powder coated finish. High strength permanent magnets with protective rubber coating ensure the tray securely attaches to any flat ferrous metal surface, without damaging it. The extended rear stabilizing plate with protective rubber guard increases the force required to remove the magnets from the surface their attached to, increasing the holding capacity of the tray.Suitable for keeping small parts, components and tools near to hand when working on vehicles, domestic appliances and other equipment..



Steel tool/parts tray with durable hardwearing corrosion-resistant powder coated finish. Suitable for keeping small parts, components and tools near to hand when working on vehicles, domestic appliances and other equipment. Three high strength magnets in protective non-scratch rubber coating.
Three high strength permanent magnets. Tray size: 210 x 115 x 31mm (81/5 x 41/2 x 11/5")
Rear stabilizing plate size: 210 x 125 mm (8" x 5")
Weight capacity: 800g.

1" Drive Retaining Ring & Pins

To suit outer diameters: 46-58mm, 62mm and 78-86mm.

Machinists Hammer (DIN 1041)

Machinists hammers suitable for use on metal. With hickory shaft. Manufactured to European DIN 1041 standard.

Kennedy Swivel End Socket Wrench Set

Designed to give greater flexibility and improved access when working in difficult conditions. Bi-hexagon (12 point). Manufactured from fully polished chrome vanadium steel. Conform with ANSI B107.5M.

Metric (6 Pieces)

Contents:
8 x 9, 10 x 11, 12 x 14, 14 x 15, 16 x 17 and 18 x 19mm.

1/4" AF Hexagon 'Direct Drive' Screwdriver Bits

1/4" Hex with ball recess.

Pozidriv

SiteSafe® Contractor Cold Chisels

SiteSafe® Contractor cold chisels are available as flat chisels, cross cut chisels, brick bolsters and electricians' floor chisels. They are all manufactured from high strength octagonal section chrome vanadium steel with ground cutting edges.

Conform to BS3066.

Contractor Brick Bolster Chisels

SiteSafe® Contractor brick bolster chisels used for splitting bricks.

Wobble Extension

Chrome finish.

T-Handle Clamps

Manufactured from high strength ribbed girder section heat treated carbon steel for improved strength and rigidity when placed under working loads, with nickel and chrome plated corrosion resistant finish the drive screw and T-bar are chemically blacked. Sliding T-handle for easy clamping. The swivel ball joint clamp foot ensures the clamping forces are applied evenly.

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Metric