Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

A/F

Kennedy® Standard Industrial Terminals - Yellow Ring

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Rutland™ Stainless Steel Garden Tools

Rutland™ garden tools premier stainless steel range of gardening tools have highly polished and ground stainless steel blades, that will not get so clogged up and will cut cleanly through even the heaviest types of soil.

The swan neck socket and blade design greatly improves the strength, making them more resistant to bending.

The deep sockets of the single piece blade casting ensure they are securely fixed to hard wearing polypropylene 'YD' handles and shafts.

Stainless Steel Digging Spade

Suitable for general application. Blade width: 180mm. Overall length: 1030mm.

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Metric

Shaver Tool

With tough enamelled alloy bodies and high carbon heat treated steel blades.



With plastic holder.
Blade length: 63mm.
Blade width: 40mm.
Overall length: 185mm.

Stencil Sets

Interlocking with sizes 40mm to 75mm manufactured from brass, and sizes 90mm to 150mm manufactured from zinc.

Numbered 0-9

3/8" Square Drive Bi-Hexagon Sockets

Chrome vanadium. Bi-hexagon. (12 point). All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all 3/8" drive accessories.

A/F

Kennedy Drain Rods

The Kennedy drop scraper when used with Kennedy drain rods glides over small obstructions and drops into a vertical position to allow material to be dragged back.

Available with two different type of joints:

Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction.

Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions.

6?? Drop Scraper Universal Type

Individual Nickel Plated Carbon Steel Founts

Precision manufactured carbon steel stamps with nickel-plated finish. For producing clean impressions in one impact. 3mm character height.

Spare Parts

For Kennedy Heavy Duty Lever Action Riveter (KEN-569-3000K) - illustrated.