Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Facom 39 Short Combination Wrenches

To ISO 7738, NF ISO 7738. Short shank and compact heads. Ideal where access is restricted. 12-point ring angled at 15°. 6-point ring angled at 15°. Satin chrome finish.

Inch

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive
environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark
resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Spark Resistant Wedges

Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Flat Chisel

Used by the engineering and building trades for cutting and chipping cold metals, brick work and stone. The angle of the cut edge should be 60 - 70, inclusive, but is dependant on the material to be cut. When cutting metal, the softer the material is, the more acute the cutting angle should be.

Tri-Torq Torque Wrenches

Tri-Torq wrenches are a unique triangular handle design linear torque wrench, once the preset torque has been reached an audible "CLICK" is emitted. Manufactured from high quality satin finish steel with a polished steel head.

Conforms to BS EN 26789 : 1994 and Federal GGG-W-686 standards.

FXL300 1/2" Drive 60-320Nm Torque Wrench

Torque Range:
60-320Nm/45-235ibf ft

Valve Grinders

For grinding and lapping valves. Solid wood handle with rubber suction cup for firm positive grip. Overall length: 224mm

Stanley FAT MAX Screwdrivers

Stanley Fat Max screwdrivers with soft grip handles and smooth domed ends to allow added comfort and a fast spinning action. Handles are moulded directly to the chrome vanadium shaft by a virtually unbreakable bond making them highly reliable and providing extra long life. colour coded ends allow for easy identification of the `right` screwdriver for each screw type.

3/8" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

A/F

Pin Vices

Designed for holding round materials. With hollow handle which enables longer pieces to be held.

Leica Laser Distance Meters

The Leica DISTO? D5 is a versatile laser measuring tool that is able to perform many different calculation functions, from direct measurement, area calculation to indirect measurements using the tilt sensor horizontal distances can be calculated in spite of any obstruction. The built in digital Point finder, a high resolution 2.4?? colour display and 4x Zoom, make aiming at longer distances easier; you can even carry out measurements in glaring sunlight.

Features:
Digital Point finder with 4x zoom
Large colour display screen (2.4 inches)
Inclination measurement up to 45
Power Range Technology?
Robust with IP 54

DISTO? D5 Laser Distance Meter

Leica DISTO? D5 Technical Specifications:
Min/max. measurement
Continuous measurement
Addition/subtraction
Area/volume measurements
Room calculations
Indirect measurement by Pythagoras
Indirect measurement by tilt sensor
Trapezium function
Measuring accuracy type 1.0 mm
Range 0.05 to 200m
Power Range Technology?
Distance in m
?laser-spot in mm 10m = 6mm, 50m = 30mm, 100m = 60mm
Tilt sensor - measurement range 45
Accuracy to laser beam 0.3
Accuracy to housing 0.3
Unite in tilt sensor 0.0, 0.00%, mm/m, in/ft
Digital Point finder with 4x zoom
Store constant value 1
Recall last values 20
Time delay release
Display illumination
Measuring units m, ft, in
Measurements per battery set up to 5.000
Multifunctional end piece
Tripod thread
Batteries Type AA 2x1.5V
Spray proof/dust protected IP54
Dimensions 143.5x55x30mm
Weight with batteries 195g