Insulated Spanners

Manufactured from chrome vanadium steel. Spanner dimensions conform to DIN 7447. Fully insulated to conform to VDE 0680/201, IEC 900 & BS EN 60900 standards for safe electrical applications up to 1000V.

Insulated Single End Ring Spanners

Facom 39 Short Combination Wrenches

To ISO 7738, NF ISO 7738. Short shank and compact heads. Ideal where access is restricted. 12-point ring angled at 15°. 6-point ring angled at 15°. Satin chrome finish.

Metric

Monument Tools Tap Reseating Set

Tool fits 1/2" and 3/4" in BS1010 new series and BS5412 flat and bevelled seats, six cutters and two double bushes in set.
Cutters:
Flat: 11/16" and 3/4", 17mm and 19mm.
Flat: 13/16" and 1", 20mm and 25mm.
Bevelled: 11/16" and 13/16", 17mm and 20mm.
Fits old series 1/2" and 3/4" BS1010 flat seats, four cutters and two tapered cones in set.
Cutters:
11/16", 3/4", 13/16" and 1", 17, 19, 20 and 25mm.

Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy® Uninsulated Terminal Crimp Tool

Uninsulated terminal crimp tool with full cycle ratcheting crimp frame and adjustable crimp pressure. Carbon steel jaws with a chemically blacked finish and PVC handles. Tab width: 6.3mm.Capacity: 0.5 - 1.0, 1.0 - 2.5 and 4.0 - 6.0mm.

Model TCU 006

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Hexagon

Ballpoint Hexagon Key L-Wrenches

Heat treated alloy steel blades. Ball end allows work up to 25 off screw axis.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Sledge Hammers

Double faced sledge hammers are fully forged and heat-treated. Ideal for use on spikes, stakes, cold chisels and hardened nails. They are available with a hickory or fibreglass shaft.

Fibreglass Shaft BS 876

Dampens the impact transmitted to the user's hand and wrist. The high strength of the shaft and head bond make the hammer virtually unbreakable. Tested to the requirements of BS 876: 1981 (head stamped BS 876).

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Metric