Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

Pipe Cutters & Wheels

Single cut wheel with two (3 - 30mm) and four (5 - 64mm) rollers. Suitable for stainless steel, brass and copper tubes. With deburring blade.
*5550K has quick release mechanism.

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

12.7mm x 7.6m

Spare Blades for Kennedy Plastic Pipe Cutters

Capacity: 6-36mm. To suit Kennedy Plastic Pipe Cutter (KEN-588-5840K)

Lever Reversible Steel Handle Flexi-Joint

Fully chromed lever type. All steel handle. The hinged joint gives additional capability in areas of restricted access.

1/2" Square Drive

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 25ft

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm

Kennedy 22mm Automatic Pipe Cutter

Robust pipe cutter that will cut copper, brass, aluminium, PVC and thin-wall conduit. Automatically tightens and cuts when turned around the pipe. The compact design makes it ideal for working in confined spaces. Capacity: 22mm.

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 25ft