Swedish Pattern Pipe Wrenches

Narrow design for confined areas, used for gripping pipe and nuts. Forged chrome vanadium heat treated steel. Knurled adjusting nut with guiding reinforcement on handle. Conform to DIN 5234.

"S" Type

"S" shaped jaws grip at three points to ensure a maximum grip.

Spare Jaw & Nut

To suit Kennedy Heavy Duty Pipe Wrenches

Heavy Duty Self Levelling Single Roller Stand

Heavy duty all steel welded construction. Unique levelling pads for uneven floors. Adequately supports up to 100kg.
Legs fold flat for easy storage and transportation.
Pre-assembled and ready to use.
Height adjustment: 758 to 1197mm.
Bearing roller: 51 x 284mm.

Replacement Cutting Wheels

To suit Kennedy Pipe Cutters

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 7 sizes ranging from 8" - 36".

Standard Duty

Kennedy Aluminium Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Lightweight aluminium alloy handles. As robust as heavy duty cast iron wrenches. All moving parts are heat treated. 4 sizes available ranging from 10" - 24".

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

12.7mm x 7.6m

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 8 sizes ranging from 8" - 48".

Heavy-Duty

Kennedy Pipe Tools

Kennedy adjustable pipe wrenches have a pressed steel handle with high carbon steel profiled jaws. They are a general purpose wrench with milled and hardened teeth which grip the work piece tighter the more pressure is applied.

Adjustable Pipe Wrenches

Available in three sizes/capacities:

Overall length: (7??) 175mm:
Capacity: 1.5 - 38mm (1/16? - 1 1/2?).
Order Code: KEN-588-2710K

Overall length: (9??) 225mm:
Capacity: 3.0 - 64mm (1/8? - 2 1/2?).
Order Code: KEN-588-2720K

Overall Length: (12??) 300mm:
Capacity: 6.0 - 75mm (1/4? - 3?).
Order Code: KEN-588-3040K