Pipe Vice & Stand

Hinged pipe vice, used for repetitive tasks on pipework. The frame of the pipe vice is made from cast iron with jaws made from hardened tool grade alloy steel with a corrosion resistant coating. The top jaw of the pipe vice is held in position with a hook which automatically engages when the vice is closed. Can be fitted to bench or stand.



Stand is of robust construction and is suitable for workshop and site use. Essential for use whilst cutting, bending and threading pipework. The stand is fitted with an integral tray for holding tools and fittings, wide angled legs give greater stability and the folding design provides easy storage and transportation. Fitted with anti-skid duck board for operator safety.

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm

Flexi Ring End Sockets

Made from Polished Chrome vanadium.
These tough Flexi Ring End Sockets are made for access to
that awkwardly positioned nut or bolt

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 25ft

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

Spare Jaw & Nut

To suit Kennedy Heavy Duty Pipe Wrenches

4 in 1 Micro Pipe Bender

Can be used with four pipe sizes: 4.75mm (3/16"), 6.0mm (1/4"), 8.0mm (5/16") and 10.0mm (3/8") pipe. Quick change aluminium formers for improved user productivity.
Carbon steel guides.
Bends copper and steel pipes.
PVC coated grips.

Kennedy Aluminium Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Lightweight aluminium alloy handles. As robust as heavy duty cast iron wrenches. All moving parts are heat treated. 4 sizes available ranging from 10" - 24".

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm