Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 20ft

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 7 sizes ranging from 8" - 36".

Standard Duty

Feeler Gauges

Quality industrial with hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.

Metric: Manufactured to BS957: 2008 Part 1 Metric.

20 Blade: .05, .1, .15, .2, .25, .3, .35, .4, .45, .5, .55, .6, .65, .7, .75, .8, .85, 9, .95 & 1mm.

Spare Blades for Kennedy Plastic Pipe Cutters

Capacity: 25-63mm. To suit Kennedy Plastic Pipe Cutter (KEN-588-5844K)

Spares and Accessories

To suit the Kennedy Drop Head Threader (KEN-588-8800K).

Kennedy 12-42mm Plastic Pipe Cutter

Stainless steel blade. Diecast alloy body. Extra wide lower jaws ensure easy production of 90 cuts. Guillotine action ensures a clean cut every time. 7-stage ratchet. Handle retaining loop for compact storage & blade safety. Replaceable blade. Not suitable for cutting metal.

Kennedy Pipe Tools

Kennedy adjustable pipe wrenches have a pressed steel handle with high carbon steel profiled jaws. They are a general purpose wrench with milled and hardened teeth which grip the work piece tighter the more pressure is applied.

Adjustable Pipe Wrenches

Available in three sizes/capacities:

Overall length: (7??) 175mm:
Capacity: 1.5 - 38mm (1/16? - 1 1/2?).
Order Code: KEN-588-2710K

Overall length: (9??) 225mm:
Capacity: 3.0 - 64mm (1/8? - 2 1/2?).
Order Code: KEN-588-2720K

Overall Length: (12??) 300mm:
Capacity: 6.0 - 75mm (1/4? - 3?).
Order Code: KEN-588-3040K

Midget Pipe Cutter

For use on copper, brass, aluminium and thin wall conduct. Supplied with spare blade. Width: 25mm. Overall length 95mm

Double Flaring Tool Set

Manufactured to double flare soft steel, aluminium and copper tubing up to .040" wall thickness producing SAE 45 flares. Heat treated alloy steel swivel is precision ground and chromed to reduce friction. Heat treated drop forged yoke. Each adaptor is clearly stamped with the size for easy identification. Bright lustre plate finish with contrasting black oxide. Will also produce a single flare. Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", & 5/8".

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm